by that do you mean the 10mm microbore tubing you buy on a reel that is insulated in a white rubber type of lagging?
Well, Ive not had a hugely productive day, Ive been helping a friend get some bits together for a mod on his P180. But anyway here is the...
yeah thats one of the changes Ive made, it now come up in the corner of the case near the edge of the PCI slots... pics will come shortly ;)...
OK, so I removed the faulty pump without having to fully drain the loop, and for the mean time Ive put a coupler where it was. TBH the flow...
well I got my loop all set up, Ive changed my plans dramatically BTW - but I will get to that another time... so I went to fill the loop up,...
thnks, I took the pump apart, but the shaft wasnt stuck to the impeller, it just seems to wobble around inside the motor housing a bit much, I'll...
Ive now changed the route of that pipe - I did intend to have a draining point on the exterior of the case at the back but I decided to to it...
Quick Update... Well thankfully the bits that were missing from my order turned up today, so I fitted the barbs and got on with it. First I...
the only tube running outside of the case is the copper pipe behind the case, which you wont see when its in position on my desk, and it can...
Well yesterday I didnt get very much done on my project, but I did help my friend build his very first PC, a nice little system he picked up for...
All painted! w00t! Well, what a difference a day makes, the radbox is all painted, in the end it got 5 coats of black, and 4 coats of clear, and...
sorry no update last night, not a real lot to post as all I was doing is painting the radbox, its having its final coats today so I should be able...
Those are very basic butt joints that have 2 screws in and will probably have been glued. They will be MUCH stronger than a mitre joint, and a...
OK, so some quite decent progress to report this afternoon... Late last night I stripped down a Sunbeam Rheobus that I bought, I plan to use it...
yeah I now have to fine tune my loop planning, the biggest prblem Im facing now is the res, I have ordered a 5.25" bay res, but I think that might...
well, having said I was quite happy with the grill I decided perhaps you who thought it might not provide enough airflow were right, so I was...
Well there is some progress to report today... Thankfully at 9am this morning my HE120.3 rad and Eheim pump arrived, nicely packaged and it...
Ive seen this done before, but it was 2 Shuttles joined together, one being the main components carrier with the other housing the PSU and...
no, thats where the risers come in...
Thanks for the kind words, its much appreciated :) Yeah Im used to building things like this as I work for a boat building company :) I hope...
Separate names with a comma.
