I'd say don't lose the plexi cover, just age it like the other stuff.... skuff it up, chip it scratch it, put stains on it etc. It will match the...
Here are some..... http://store.compute-aid.com/cgi-bin/category.cgi?category=100&type=store look at the different pages. :D
Dude that's supa sweet.. now throw up some pics with the res full and the lights on. :D
Actually, many DMM's have a select button for AC or DC reading. Or and I not reading you right and your saying that you don't understand how it...
There are a few types of chemicals that are used for etching, the most widely used is ferric chloride. It stains like hell so be careful. But...
Yes it still has that handwritten look.... you can even get this book at Radio Shack here in the states.
My guess is that it'll suck trying to make a new one.... even though it may be a pain in the ass to sand and bondo it may be the easiest in the...
Extruded acrylic is way crappier to work with. Cell cast acrylic will not melt when cutting on a table or band saw or while gang cutting. Its...
Well I never minded it before but..... Just so you get some idea.... here is the pinout for one channel of displays... thats 4 7 segment...
I haven't sat down and figured the cost actually, mostly because at this point, I really don't want to know. :eeek: I'm sure it was well over...
Again, thanks for the nice comments fellas. :D Here is one more pic I tried with a longer exposure. This actually shows more of the true...
It may seem to be working fine but if your driving the LEDS above the recommended fV then they will probably burn out rather quickly.
Thanks, I'll give that a try tomorrow and see how it goes... my camera isn't exactly new at this point but I'll try it out.
I shouldn't think you'd have a giant problem with this. Are you printing on paper or transparencys? I use transparenys and have taped peices...
More pics for your enjoyment :D Just to give you an idea of how cramped it is up front, here is what the faceplate looks like from the inside...
I hear ya, but there wasn't enough room for that with the pots and switches etc and the goal was to get it all to fin in a 5 1/4 drive bay. The...
For anyone interested, the a/d converter chips are ICL7107CPL which run around 3bux US. You may be able to find them cheaper. Here is a linkie...
Maybe you can now but 3 years ago when I was starting this thing you couldn't. I have used allelectronics before. The only .3" displays I saw...
Ya I dig, but they really arn't that noticable at all really, the flash in the pictures makes it show up more then it usually does.
Son of a..... :wallbash: Welp, I tried out photobucket.com like some people here have suggested and it seems like that site is currently...
Separate names with a comma.
