I think that it may look a little odd with one mesh blank covering 3 bays and one mesh blank covering 1 bay. So I'd go with the 4 individual bay...
Another sugestion would be to clamp a scrap piece of wood beneath the material you are cutting if using the hole saw method. This will help...
I agree with your point. Looks like some pretty good work thus far. :thumb: Hopefully you don't come across anymore little mistakes like when...
Another excellent mod! It really turned out great, and a little creepy... There is one thing that I think might add that "final" touch to the...
No problem.. I've been doing electrical construction work for the past 11 years or so and am happy to help others. Just one question for you...
Yes it is legal.. It is done all the time. The only thing you need to watch is the current load on the breaker/fuse. Just take 180 W per...
The feedback left for the fool who purchased it. uhhhh.... mmkay
You could try something like Devcon 2-Ton epoxy, which is really good. Another product that might work would be PC-11 made by Protective Coating...
Try http://www.expresspcb.com/ . They can make almost anything you want. The thing is though, you have to design it using thier software. After...
Check out this setup ... This works through the serial (com) port on your computer. There are some links for programs and plugins to use the...
uh... yup... here I don't know if that was sarcasm or not. Anyway. I have to agree with you about these forums. The peeps here are the most...
well...... It is now May and you have yet to return to us. :D J/K I was just catching up on some of the projects and noticed that you haven't...
Mighty fine work you have there. I think that you did an excelent job in capturing the HalfLife theme. Keep up the great work! You are an...
Looks real good coorz. :thumb: to henri for figuring out the software for it. Too bad about the rest of them being sold though. I would have...
Journeyman Electrician. I work mainly on comercial and industrial job sites. $19.50/hr Decent pay for a non union shop, and I lkike what I do....
uuhhhh o k .... I do believe that the person in that last photo has the iron turned up too high though..
Personally I would go with the jigsaw. However, since you stated you don't want to go that route.... Well. A hacksaw would be kind of dificult...
Try this .. The connectors used here are not headphone jacks, but coaxial power jacks and plugs. Coaxial power jacks are safer to use in that...
In residential applications, there is no easy way to change the route a circuit is done in. Changing the breaker to a larger one will work....
Yes this has been discussed before. Here .... So to sum it up.. It is a lamp. :D
Separate names with a comma.
