i agree with monster on that ! 9600 SE has only 64 bits, which makes it a very slow card you'd better get a 9200pro instead of 9600 SE or keep...
so i understand that in order to achieve more oc i must increase the core voltage my question is: will that heat the core causing more artefacts...
what exactly do you mean by oc?? if the card can be oc or how high it can be oc ?
the Ti cards are superior both 5200 and 9200, but the only problem is that they are "technologically beated" by the newer ones like 9200 and 5200...
indeed, the cards based on 9200's model (9200 se, 9200 and 9200 pro) are made for DX8, but they also support DX9 5200 is made for DX9 and that...
try the gigacube bios ! it seems to be the best bios for 9800 pro
that's more like it !!! is it stable at those freqencies ? anyway, you own one of the best 9800 pro's made so far, because there are some cards...
hmmm...405 mhz you say?? it's the first time that i've heard about such a big frequency at a 9800 pro it's standard frequency is 340 for 128 mb...
the gigabyte 9800 pro doesn't have a temperature sensor, so i was forced to take the card's temperature with the famous method of the "finger"...
that card is a very good one and 437 mhz core clock is very high !!! rv350 is indeed better for normal oc (it overclocks higher than the rv360)...
I sure hope that it will work cause else...I'm toast ! ::)) and no, I won't use that cooling kit, I like to make my custom cooling
aham, and how can I improvize a way to put a heatsink on the back side of the card without burning it? should I use a dielectrical paste to tight...
thanks man !
from this pictures I understand that it's very important that the heatsink mounted on the back side shouldn't touch the circuits it seems that...
it's not that, many 128 mb 9800 pro's can be modded into real 9800 xt's of course memory counts, but not that much as the memory latency and the...
read up, I've already did this and the results still don't match with the results of a modded 9800 XT and the difference is quite big...(500-600...
I'm back with a new thread ! I hope that moderators won't mind that because this one has no connection with my latest one so, I have the...
I don't understand why should I get the ati tool ??? I've just said that I ran some tests using the ati tool maybe I didn't get the ideea,...
I've managed to keep this video card preety stable at 430/740 with the stock cooling but with a low temp in the case, so I did some serious...
highland3r thanks for the tip, but my question remains: what type of bios should I use for getting my modding ??? better said, from which...
Separate names with a comma.