MS- are the holes in the innovatek res 1/4 BSP or NPT? Thanks man
I would try to order the same fittings in black from McMaster carr...I have bought black fittings from them before no problem. How colorfast will...
I saw a TV show about chroming, so take this for what it's worth, however, the step before the chrome is applied is a layer of nickel so that may...
Wow, looks real cool. I would lose the wing nuts on the side panel however, but thats just me...maybe some nice M4 nuts in INOX?
did you try it without drilling the hole? Just worried about cracking ect...
JB weld will work man, just let it dry overnight in the vise, or clamps. Make sure your joints are flush and clean, the 45 degree angle will help...
to to McMaster Carr.com...I tried to link it but they seem to be down @ the moment. Use "tygon" for the search term, they are the cheapest as...
the rear USB header near the AGP slot is a extra USB header, exclusive of the front USB's. It is for the wireless module shuttles sells. I have...
The shuttle PSU is auto switching, just plug in a euro cord and you are set. And yes, I have personally done it. Look at the label on the...
Zap-Just like the last poster, If I wanted to just do the eject portion, could I just solder an extension wire switch to the gnd and switch of...
I posted my shuttle here as well search my username if intrested. MKH :thumb:
I have a 80 gb raptor, a 9800 pro XT and 2 80mm high flow panaflows, a c-sytems pump and a dvd burner....with the stock PSU. It can take it.
I love that molex mod, very practical in a shuttle, what guage wire is that?
OK fixed the pix, I also added a 70mm fan I had laying around till monday...temps droped to 40 flat @ idle. -MKH
Crap, guess I should read the rules...Sorry! :waah:
Well, here is my water cooled, and fully internal Shuttle (right now), I have built it up over the last couple of weeks, adding this and that as I...
Parts list: • Black mesh case cover by shuttle • Barton 2500+ Unlocked Runs at up to 2.4 Ghz • 512 Platinum Edition XMS pc 2700ll ram –Runs at...
Separate names with a comma.