Here it is, all painted and mounted on the wall. It's been working great and is very quiet except for the noise created by six hard disks spinning...
Rest assured, it was cut in a well ventilated area, not only do we not like breathing nasty dust but we also don't like cleaning up inside....
Hi, you might remember me from my last project log: http://forums.bit-tech.net/showthread.php?t=89645 I'm back with a completely different type...
When you say 3/16" pipe you mean tubing right? It really depends on what you want the system to do and the design of your waterblocks and pump. If...
Are you planning on using screw in barbs in the inlet and outlet holes? If you are I'd be concerned about having enough threads to engage for...
But Wait, There's More! So I've gotten pretty settled in here at MIT and I got the new computer up and running about a month ago. One problem,...
One old popular way of making waterblocks with a drill press was to drill holes into something like a 1/2"x2"x3" copper block both widthwise and...
It all depends on the composition and thickness of the metal and the type of cut you want to make. A Dremel is great for small intricate stuff...
T minus 1 day: I got up early this morning in hopes of maybe having the good fortune of getting this thing working before I leave at 10:30am...
T minus 2 days: While at the hardware store getting a new tap I got a great idea, instead of making new bungs I should just cut off the old...
The more pre-built stuff you can work into a project almost always the better off you will be, especailly if it's a drop-in part like the mobo...
I'm on my way up to Boston and finally have the time to put together a log for the past few days. I don't have pictures of everything since I was...
Just as a quick update, it's 12:50am on Saturday. That's negative fifty minutes to the deadline. I'm preparing to power on the system now. I'm...
I got a PM asking to clarify some of the steps in painting and my reply exceeded the PM character limit so I'll post the clarifications here for...
I gave the radiator hose thing some thought when designing it and came to the conclusion that at most it's a medium destructive risk as opposed to...
I wouldn't just suggest that it be on the strongest corner, but that the corner be reinforced. Get yourself the best vise you can since you'll be...
Guess what, I didn't get as much done today as I wanted. I applied the last coat of clear at 11:00pm but didn't get any work done on the frame at...
Yeah, I really should do that. Some of them I do rotate, but sometimes I get in too much of a rythm while uploading the pics that I don't realize...
w00t! All of the parts that need to be painted have been finished, the final welds have been made, and they've all been prepped for paint:...
Nah, steel is a very forgiving material to work with. As easy as wood but in different ways. If you screw up the bend totally you'll be out of...
Separate names with a comma.