I have to agree with Kookalamans there is way to much “I Think” going on in these boards. The problem is facts are hard to come by; computational...
I got back some demo Cu bottoms with a new pattern I came up with milled in them. Here are some pix. [IMG] [IMG] These are just demos but...
I have to first thank you all for your criticism in the past, it is what has made the block what it is today. I’m still struggling with the...
After a long wait finally an update! I got back the final polycarbonate tops from my machinist. This seems like the wining final design. The...
The thing with the A64 is that it only uses 2 mounting holes to mount the cooling device. This means that there is twice as much pressure on the...
I’m currently working on getting some more final polycarbonate blocks and new back mounting bracket to send out for review. This shouldn’t be as...
The Cu bottom is actually thicker then it appears in the photos because there is a lip that helps seal the block. The base is 1/8" thick over a...
Hi guys! I have been away for a while sorry for the wait. www.r0x0rblock.com has been updated to showcase the new, finalized r0x0rblock. I’m...
The polycarbonate block in the pictures is just a final beta test block that was milled out of 1/2" thick polycarbonate (much thinner then the...
Yeah I used my Al toped test block with Cu bottom. I don’t have a sealed polycarbonate one with mounting holes but I don’t think it will make a...
Update :rock: I mounted the block on my P4 2.4 GHz CPU with the proper mounting hardware (no zip ties this time)! Here is a pix of it in my...
Quite a few people have been saying that this block is small. It seems to be about average size to me. Here are some pix for a size reference. It...
Tulatin, I like your idea about mounting the block sideways on a P4. I thought about it before but never figured out how much of a difference the...
Update! I got the polycarbonate tops! and matched it up with a Cu bottom. I have to say it looks p0wnage. Here are some pix. This is prabably the...
Sory bigZ but the Cu was NOT just added to the Al base. That is a solid Cu base.
Update! Ok i got some Cu bottoms here is a pix [IMG] You also mentioned Plexy tops. Well I had my machinist make up some tops out of...
:clap: All your concerns are extremely valid! Ok first of all i wanted to address some of the design aspects of the block to make all the cather...
Thorilan I resent what you have to say about my block. Sure the R0X0R Block does share some similarities with Cathers block but this comes from...
It's almost been finalized that the base of the production models will be Cu!!! :rock:
RIGHT NOW!!! Ok these are really unofficial, I don’t have a radiator so I used allot of water. The test rig consists of an FIC AD11 motherboard,...
Separate names with a comma.