In the senddram call you have not incremented FSR so it still points at the same location it was left at in the setram call - when it pointed to...
I think that your wiring is wrong - there appears to be two errors: (1) The Crystalfontz software expects pin 15 on the LCD Module to be...
It is possible to drive multiple LCDs from the same parallel port WITHOUT any additional hardware - all that is required is that you use a...
Anyone buying resistors from Maplin should be aware that the resistors they sell mostly seem to use the 5 band colour system as opposed to the...
Hi again, The Crystalfontz test software will work correctly as, as far as I can tell, all of their 1x16 displays are actually arranged as a...
Hi, It looks to me as if the problem is that you have a 1 line by 16 display that is organised as 2 lines of 8 characters (yes there are some...
Try looking at LCDHype (www.lcdhype.de.vu) as it supports T6973c controllers at various screen sizes including yours. It is a German site but has...
The version 2 FTDI USB chips have a feature called 'Bit-Bang' mode. In this mode the 8 data lines can be programmed as inputs or outputs and when...
Hi Try this URL : http://lcdhype.mod-extreme.info/lcdhypeforum/index.php?showtopic=131&hl=noritake as it shows that the model you are talking...
Hi Try using LCDHype (www.lcdhype.de.vu) as it supports the escPOS command set and the manual shows that this device can be set to operate in...
Nigel - I don't disagree with your views - if you do not have the knowledge or skills required to 'build your own' you will be better off with a...
Hi, I disagree with the previous comment; both of the displays that you have 'selected' have controllers; the graphics device has a KS0108B and...
Hi, Don't know if you have tried them but look at: http://www.surelight.com/products.php?productId=198 They supply 12v 400hz 110v inverters...
Cancell
Sorry again I pressed the wrong key at the wrong time As you will probably realise I was about to point out to you what you have just...
Very sorry about the last post - I really MUST make sure that I press the correct keys - sorry - What my reply should have been was:- I do not...
Hi The information you want is on the bgmicro web site - look at the items on the right hand side of this url:...
LCDHype works with SED 133x controller based systems and support for 256 x 128 has just been added. see www.lcdhype.de.vu ("LCDHype Board ->...
I have been using it for a few weeks and now would not use any other software. It has a powerful script language that allows users to do most...
Separate names with a comma.