The best solution would be to grow up and work out this tension in your relationship with Dad. Your approach is so reactionary when you should be...
With all due respect, you're a little late! Not only do they have drives up to 60 GB in the 1.8" form factor, but they are about to have...
You people are getting ridiculous when it comes to trying to sound smart. 6Al/4V is an industry term for Ti6Al4V. The titanium is dropped from...
You pretty much have it right. First, determine from the barrel connector which is power and ground. That's the hard part! Then snip off the...
Let's see, 2.3 volts at 45 mA. We can treat the diode as a resistor, but the value changes as we change voltage or current. Anyways, at 2.3...
My experience tells me that the more terminal strips, the better.
Use a straightedge for a nice and straight brushed finish. Wet-sand for a finer finish if you prefer.
You'll need to power the hard drive from separate 5 and 12 volt sources. The extra pins on the 44-pin connector aren't enough.
It's ironic that the creator of the laptop LCD FAQ could use some research himself. There are lots of LCD controller suppliers, and the boards...
Nice and neat job. You should be proud. That reminds me of a an old 8086 board I've got that features a processor, a few proprietary ICs, and...
Ah, yes, but LCDs have a proprietary digital interface that requires an appropriate controller to translate the industry standard TMDS signal...
I don't know of any boards offhand, but I have two realistic possibilities: 1. Digital View AVP-1280. Digital View...
The thing that bothers me is that 99% of the Search the FAQ people are flat out wrong. LCD controllers are much more easy to find as they were...
Okay, I have a Samsung LT141X7-124, obviously a similar model. I have it running with a DiCON LCD1280FI controller in XGA mode (1024 x 768) under...
Yeah, there it is. I couldn't find the closer match for some reason...
http://www.taligentx.com/projects/opticalconverter/#introduction
Connect Pin 15 SCART to pin 1 VGA (Red signal) Pin 11 SCART to pin 2 VGA (Green signal) Pin 7 SCART to pin 3 VGA (Blue signal) Pin 13 SCART...
This is a solid alternative to the well respected Hakko 936-12 soldering station, with similar specs:...
http://www.hifi-regler.de/scart/vga-scart.php A Google search for "scart vga" also turned up some cable converters that you can buy ready-to-go.
I don't care about your flames, since it's your problem anyways. I didn't mean to assume that the power supplies you had were SMPS, but rather,...
Separate names with a comma.