Already done it. When rebuiding my house I put two WC loops in. One in the kitchen floor and the other in the crawlspace under the living room....
A bit off-topic, but a Discworld quote is always good: It was a puzzle why things were always dragged kicking and screaming. No one ever seemed...
Not really sure about total cost, as I was building the cooling while I was working om my house... So bought some bits and bobs now and then......
Well, the kitchen looks a little different now: (last kitchen pic showed lower left corner of this one, pipes to first floor is inside the wall...
Alright, I'll try to include som pics here: Here you see the copper pipes under my living room floor. 22mm pipes, about 35 meters in total. As...
MY setup doesn't really out do that, but somewhat the same... About 40m of 22mm copper tubing in the crawlspace under my living room floor....
Sparks? Shouldn't be any sparks... Maybe you're running your drill at too high RPM? Check the holesaw, should be a speedguide. Go slow but...
Just make a switch that switches the ground from the fan between ground from PSU and +5V from PSU. +12v - +5V = +7V Do note that fanspeed...
This looks more like some "My first Windows!" thing... I don't want all the fancy graphics, give me something that works and where I can find what...
http://FantasticContraption.com/?designId=427513 Timed it at 5.898 and with 9 wheels for a total of 6.798 seconds
So, my laptop won't charge the battery anymore. Still runs fine when the charger is connected, so the charger works and the internal psu is fine....
..or duct the air coming from your box to the thermostat? No tampering but the AC will surely kick in! Or even a resistor right next to the...
I'm using it with a Siemens, so it's not Sony/Ericson only...
Try this one: http://fma.sourceforge.net/ I'm using it at work, for controlling powerpoint and stuff like that. But a lot of options and...
Predictive help CAN be a good thing. As long as it can correctly detect/predict that I don't WANT any help also.. But where I work, we have...
So, just an idea: Nowadays there are printers that can print directly onto cd/dvd's. A flat surface.. If you somehow get a piece of copper clad...
All options we can get, helps! I've just installed a phoneline in my new house, only because I need an internet connection (actually I'll cancel...
Here is the mouse I modded som time ago: Fan and LED's Finding the right fan was the hardest part, as well as making sure it wouldn't hit...
Looked at those, but that pricetag is WAY too much.. So I assembled a litte LM317 based regulator, it gives me about 11V when supplied with 24V...
I'm modding my printer (why not!) So, I need to get some +12V in there.. The only problem is that when the printer sits idle, the PSU delivers...
Separate names with a comma.
