Thx Update: In the next step I expanded the tray. I hope I can use the complete back cover from the case. [img] [img] [img] In my...
Today i start my Worklog of my new project. It`s a Contest Casemod at Hardwareluxx But first i thank: Hardwareluxx Klevv MSI Eizo Cablemod...
Thank you very much. N:thumb:ice that you enjoy it all .
Thus ended after the contest. After contest end, I have a monitor and a Bluetooth speakers rebuilt. The result ModdingMasters 2016: 1st...
Go on. Next, I painted the keypad and missed a great distressed look. [img] [img] In the front, I have made a slot behind the front panel....
Go on Only the installation of the SSD and PSU mount. [img] [img] [img] Next, the keys were stuck on the panel. [img] Then again everything...
Time for an update: It continued with the support of Radi and pump. In addition I have first cut and folded sheet metal. [img] [img] [img]...
Nice Work Ali. Very awsome handmade skills, nice Tubing. Like it
THX Time for update: The copper plate I satin honed, split the cooler and cut thread. [img] [img] Next, the fitting followed on board. Fits...
In the reservoir, I have welded a strut. clean This wears out the battery box and walk through the narrow remaining opening later the cables...
Update Today a packet has arrived again. Tanks to Enermax for the support at this project. Here's the overview. [img] A BT speaker...
It continued with the expansion tank First I cut pipes for the other two sides. [img] he tubes I then halved. [img] Then all...
update Time Today we went to the reservoir. The will be the supporting part in the case. The container is made of 25mm aluminum tube....
So on it goes to the front. First I printed the front glued to a sheet and then oriented. [img] [img] From the rotary switch I need only...
Working @Radio Beacon http://traveler-pc.com/casemodding-home/modding-livestream
thanks, people. Ya Ali I have to agree with you. How good a modder is can be recognized by his handiwork. The day I started with the front...
the mod will be my worstation at the Workshop. I welded it with Tig / Wig
Livestream in 15 minutes http://traveler-pc.com/casemodding-home/modding-livestream
update: I have drawn even further. First all components radiator reservoir and pump Radiator will be a 2x 80 [img] The reserve tank...
Update Time. So packets have come First the case. [img] Then the antenna and connector has arrived yet. [img] Same time to unpack...
Separate names with a comma.