Little update, I made a aluminium plate for on the PSU shroud. I sleeved all the cables for the fans and pumps too. [ATTACH]
I made the reservoir distro too, it's only the "under" side because I have to figure out where the G1/4 ports should be mounted. When it came out...
Made a new clamping mechanism for the cnc, you can put your material in it and then tighten the bolts down till it is completely solid. I will...
Feel free to ask questions btw!
Unfortunately, the black and grey extensions were around 0.8 mm thicker than the white ones I measured I made the cable combs and the passthrough...
[ATTACH] completely depinned the 24 pin extension and made a passthrpugh piece for the cables individually and the sata data cable. [ATTACH]...
[ATTACH] Did the 2 tubing runs this afternoon
Today I want to make the bends from the GPU terminal to the cpu and machine some cable combs for the 24 pin and make a small panel between the rad...
[ATTACH] yesterday flushed the loop and dismantled it.[ATTACH] Here you see the 'new' GPU terminal in place [ATTACH]applied new thermal paste...
I bought 2 pairs of 5 pieces and on Amazon for 25€ and the day they were delivered I saw the exact same ones on AliExpress for 8€ together . Those...
Thanks! I received almost all my bits and here are they[ATTACH] [ATTACH]
[ATTACH] [ATTACH]
Thanks! I have done a lot the last month, I got one 'almost perfect' distro, it's just a small one to ensure myself it was working and it did! I...
[ATTACH]
A little update, I have been busy but I did some work too. I completely disassembled my CNC and cleaned everything since there were plexiglas'...
I have designed this to slide into the GPU ports. The upper two ports won't be used so there will be 2 G1/4 plugs. At the right and left there are...
I think I have clear what I want to do about loop order etc. I want to do 2 plate reservoirs in the front of the case, like in the Antec DF500...
Sorry for the few amount of updates last 2 weeks, I had exams for school which is a little bit more important;). Further I did a lot of designing...
I made a new PSU shroud too, I'm really happy with the result. I'm drawing a mechanism to mount it easily and remove it easy which wil be 3d printed.
Yesterday I made a kinda prototype of a mini distro plate to ensure my gcode is working. I'm pretty happy with the result and I am hyped to start...
Separate names with a comma.