1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1.3 thunderbird cooling

Discussion in 'Hardware' started by Shogun, 13 Dec 2003.

  1. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    My sisters pc runs a 1.3ghz athalon thunderbird which gets up to around 65C in games. I am quite sure this is causing the instability of her pc. It sometimes switches itself off (i think the thermal protection of the mobo) and sometimes restarts. The powersupply is not a problem as it is a 300w fortron psu. It also has a geforce256 which is running very hot. I was just wondering what cpu cooler would be rated to run this proc at low temps. I was thinking around a volcano 9+ but all the ratings are for xp chips which im quite sure run at lower temps than the thunderbird. Thanks in advance.
     
  2. Highland3r

    Highland3r Minimodder

    Joined:
    25 Jul 2003
    Posts:
    7,559
    Likes Received:
    16
    umm volcano 9 should be ok... basically anything rated to 3200 will be more than adequate... I think the heat output from the 1.33 is about the same as that of a 1800 pally...
    Got one @ home runnin at 1ghz, its 45°C load, with a cooler rated to XP2000+ with fan on 7v could you not underclock if she doesnt need the extra speed...?
     
  3. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    she plays cs, and some other games that need speed too. You got any recommended coolers e.g linkies?
     
  4. Highland3r

    Highland3r Minimodder

    Joined:
    25 Jul 2003
    Posts:
    7,559
    Likes Received:
    16
  5. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    it does have mounting holes. isnt the sk7 really expensive?
     
  6. A13n0rma1

    A13n0rma1 Wannabe

    Joined:
    17 Jul 2003
    Posts:
    830
    Likes Received:
    0
    Mounting holes, eh?

    An Alpha PAL 8045 with Coolermaster White LED fan @7v cools my [barely] o'ced 1700+XP down to 33c at load.
     
  7. Highland3r

    Highland3r Minimodder

    Joined:
    25 Jul 2003
    Posts:
    7,559
    Likes Received:
    16
  8. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    ah, i got it mixed up with the alpha, which is heavier on the mobo and the wallet ;) Would an antec led fan cool the 1.3 with the sk7 enough?
     
  9. Highland3r

    Highland3r Minimodder

    Joined:
    25 Jul 2003
    Posts:
    7,559
    Likes Received:
    16
    should do, if you can mod the hs to take an 80mm, summit like a zalman braket might allow you to mount it right above the sink, then mod some kind of ducting..?
     
  10. cpemma

    cpemma Ecky thump

    Joined:
    27 Nov 2001
    Posts:
    12,328
    Likes Received:
    55
    If you don't want to spend a deal of money, the Speze Raptor at Extreme Cooling looks good @ £11.75, 80mm fan so quieter than most and a nice 3-point clip. Good reviews too. :)
     
  11. sco0by

    sco0by Mmm pie.

    Joined:
    12 Dec 2001
    Posts:
    843
    Likes Received:
    3
    Shogun:

    [​IMG]

    Any use to you?
     
  12. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    it might be if its yours ;) what hs is that anyway?
     
  13. sco0by

    sco0by Mmm pie.

    Joined:
    12 Dec 2001
    Posts:
    843
    Likes Received:
    3
    Its a coolermaster..... something

    Fits on a Socket A cpu

    Adjustable fan

    Copper bit on the bottom

    6 months worth of shelf-dust & crunchy old arctic silver on the bottom :p

    I do belive its one of these though...
     
  14. cderalow

    cderalow bondage master!

    Joined:
    23 Jan 2002
    Posts:
    3,519
    Likes Received:
    0
    indeed minus its funny grill


    I've got one cooling a TB1.1 without a problem, with a non-adjustable 30ish cfm fan and it keeps it in the 45-50C range
     
  15. Mightybob

    Mightybob What's a Dremel?

    Joined:
    5 Sep 2003
    Posts:
    79
    Likes Received:
    0
    THats a HACV81 aint it?
     
  16. sco0by

    sco0by Mmm pie.

    Joined:
    12 Dec 2001
    Posts:
    843
    Likes Received:
    3
    I took the grill off because its pointless having a fan guard on a cooler that is sealed in a case.

    And I'm pretty sure its a HACV81 - pic looks the same on the coolermaster link...
     
  17. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    how much? ;)
     
  18. sco0by

    sco0by Mmm pie.

    Joined:
    12 Dec 2001
    Posts:
    843
    Likes Received:
    3
    Whats ya address? lol :D
     
  19. Shogun

    Shogun Banned

    Joined:
    18 Jul 2002
    Posts:
    983
    Likes Received:
    0
    email me at nathaniel_basevi (at) hotmail (dot) com . :lol: as i am currently at school
     
  20. sco0by

    sco0by Mmm pie.

    Joined:
    12 Dec 2001
    Posts:
    843
    Likes Received:
    3
    Luckily the somewhat crunchy Arctic Silver just wiped off the bottom of the cooler so it wont end up smeared all over the place in transit :D
     

Share This Page