Hi, i have the following system Abit NF7 S V2.0 bios version 20, 20GB Satget barruagda 7200RPM (Master) 10B 5400RPM Drive Gefore 4 mx440 64mb (latest drivers) AMD Anthlon XP1800 pally 256mb gerneic ram pc333(2700) ram 256mb samsung pc133(2100) ram Sony CD-RW CRX 145e Samsung SD 608 DVD-ROM 375w Advice PSU Windows XP PRO .................................. My problem, i was building this systemLast night i put every thing in and hit the power botton hmm no display and i hear beeep...........beeep.........beeep it dose not stop each beep is about 3secs apart, so i took one stick of ram out same thing happend, so i took both sticks out and put the 2700 in slot one (the one the is away from the other two, every thing boots up just fine, hmm OK, then i put pc2100 ram in the slot 2 same thing, so then i take both of them out and put 2100 in slot one, works fine, please tell me whats happing and how to fix this, P.s love the new board overfloe
Set the board up for non spd detection, cas 2.5 /3/3/6 133 fsb with non agressive cpu interface and put both sticks back in and see if it likes it better. Edit: leave cpu interface on agressive to start with.
im not even going to bother putting that 2100 in there again since i have taken it out i can now get from 133FSB x 11.5 = 11.53Ghz TO 148 FSB x 11.5 = 1.70Ghz as to when i had both in there i could only get max 142FSB and even then it was unstable
