AMD Mobile 2500 or 2600?

I don't think I can change the voltage, but I read reviews on newegg.com about the 2500 and the 2600 mobile, they both said they oc very well. I want it atleast at 3200 speeds. However, I can't up the voltage. I will have a thermaltake volcano 11 on it. What can oc to 3200 speeds easilier with regulard voltage?

 

Default volted for the mobile chips is 1.45v, thats pretty low for a decent overclock. If you get a decent stepping then you'll possibly manage 2.2-2.3ghz on stock volts. maybe a little bit more. I know my mobile 2500 hundred needs 1.75 (BIOS) 1.7 actual to be prime stable at 2.4ghz 200x12.

If you are serious about overclocking then you really need a new motherboard. If you keep the same board make sure that it supports mobile athlons.

 

how would I know it can support it? I have an XFX nf2s ALH http://www.xfxforce.com/mb/product_view.php?sku=NF2SALH

 

i have a mobile 2500+ and for sum reason i can o/c to 2.5 ghz with crappy pc2100 512mb ram and default volts...... MAKE SURE YOUR MOBO CAN CHANGE MULTIPLIERS I GOT A BRAND NEW ABIT NF7-s2 AND FIGURED OUT THAT THE POS DOESNT EVEN HAVE MULTIPLIER ADJUSTS SO I CANNOT EVEN SET IT AT STOCK SPEEDS!!!!!! my old gigaybte does just fine though mm hmmmmmm gigaybte...... mmmmmmmmmmm hmmmmmm

 

That was the mistake

you need the V2.0 not s2. Thats the new board without Multi adjustements, and they added gb lan or some crap.

Anyways, back OT, both of those chips should do 3200 on or very near stock voltage. However a new mobo would be a good idea IMHO.

 

I don't have multiplayer, but I can change the fsb utp 200 I think. But wil the mobile 2500 or 2600 fit in my socket a? link to mobo above.

 

Yes it will fit in your socket, but your screwed without a multi. Mobiles default to 5 or 6 multi becuase the desktop mobo won't know what clockspeed to run it at.
Your going to need to change this to run at default and o/ced speeds (default multi is about 13 iirc)

(why , i am using this alot lately )
2.5 at default volts? get real m8 you'd be lucky to hit 2.2stable at default (1.45) volts.

 

i dont think its gay, i use the 7n400 pro2 rev2.0 i think its a sweet board, especially since i can overclock this thing more then me mates a7n8x-e and that using the same CPU and ram

 

with my mobo, would I be able to atleast oc to 200 fsb (3200) with stock voltage? Also, which hsould I get 2500 or 2600?

 

(why , i am using this alot lately )
2.5 at default volts? get real m8 you'd be lucky to hit 2.2stable at default (1.45) volts.
__________________


watever man, tell me how to post pics and ill prove to you i run it at STOCK VOLTS, STOCK TIMINGS, except 200 fbs. I was as dumbfounded as you my friend.

 

by the way its cooled by danger den maze 4 blocks

 

O AND MY MULTIPLIER is at 12.5, lower as u can imagine so its more fsb o/c

 

Ok, take a screenshot of the o/c with the print screen button (a screenshot of CPU-Z would be fine). Then, upload it to this place:

www.imageshack.us

It should be easy to figure out. Then, when it gives you a list of things you can cut and paste to put your image on the internet, copy the one with the

 

2500 + Infinity + Sp-97 + Bios Saviour = [Insert picture regarding sexual intercourse]

 

here you are:

http://img72.exs.cx/img72/3310/HAHAHA.jpg

 

damn thats blurry lemme try again...

 

I don't see anything about the memory though... Download CPU-Z, click the memory tab, and take a screenshot.

 

here
http://img73.exs.cx/img73/1405/omggg.jpg

 

instead of fighting aboug ocs please answer my question, which is better 2500 or 2600? Which wil oc to atleast 200 fsb easilier at stock voltages? Does it have to be mobile? Regular is cheaper.

 

Both are ~ the same.
Both should do 200 fsb no prbs.
yes, needs to be mobile, they clock better and have unlocked multis.

Can you post a CPU-Z screeny please, along with the mem section AND ~ 5 hours of prime
Anyone can take a death screeny... not saying you are but just to show you arent