Hey there, Here's my problem and what I'd like to do. I thought some of you may have experience with a similar setup. I have 4 computers -- one main workstation and 3 satellites connected via gigabit LAN. So we'll call them computer 01 (the main workstation) and computers 02,03, and 04 for the satellites. I have one 22" monitor and two 19 inch monitors. I have one keyboard and mouse. Currently I have Synergy running. Computer 01 is the master with the 22 inch screen. Computers 02 and 03 each have a 19 inch screen flanking the 22 incher. Computer 04 is not yet hooked up (more on this below). So, all three monitors behave like one desktop with synergy, even though they are 3 computers. Great. This is so cool. But here's what I want to do.... I want to add computer 04 to the setup. And I want computer 04 to use the 22 inch main monitor with computer 01. So I'll need to be able to switch between them, which I'll do with Kavoom. But I also want to keep the ability to have computers 02 and 03 as part of the active desktop. In other words, I want to keep all 3 monitors as they are working now, but add the ability to switch the main monitor between computer 01 and 04, while still being able to access computers 02 and 03 when my mouse moves from the 22 inch to either of the two 19 inch monitors. Have I overexplained myself? So I was wondering if anyone has used Kavoom and Synergy together. I know Kavoom offers a KM product (same thing as synergy basically), but I don't know if Kavoom KVM will work at the same time with Synergy (or their own KM, doesn't matter which). Thanks if anyone can help or offer some advice. Mahlon
