Hey guys, I want to enter the Lian Li Contest so I bought an Lian Li PC-7HX. There is just one Problem, there are still 9 days left. This is what I've done so far. I think this weekend will be very hard. I'd rather let the pictures tell, so let me just say that the theme of the mod is Lamborghini. I really like these cars and I let myself inspired by especially the Lamborghini Aventado and Reventon. Here some pics of the original case: The finish is actually to nice to destroy, but who cares? :eleph: Big thanks to my girlfriend and a friend of mine which helped out some times working on the case. Now I'm very proud to name the sponsors of this project: : : : Caseking supports this project with some nice stuff from Bitfenix. Thanks a lot I hope you have fun while reading this worklog and I'm happy for every feedback __________________________________________________________________________________________________ Now lets start with the first real update about what I did so far! At first I disambled all the stuff I didn't need, that was a lot But I didnt take pictures. Second step: I cutted some angle sections: These parts were mounted on top of the case. But why? After that, I began to cut out some plexiglass. After cutting it, I arrange the parts... ...and began to glue them together: Some parts were bended by using a heat gun: Adjusted, ground and mounted: Continued the glueing: Now it looks like that: The top of the case must be adjusted to fit the All in One Watercooler from Enermax: Now it's time for the highlight of this mod. What would a Lamborghini mod would be without some gull-wing doors? I will use some gas springs which are normally used for furniture. The bracket on the sidepanel: At the end some pics of the working sidepanels: I hope you like it.