1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress ⭐ BLACK HAWK scratch build SPONSORED *HWLEGEND MODDING TEAM*

Discussion in 'Project Logs' started by pccustom, 19 May 2019.

  1. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    inside panels 2 pieces

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    [​IMG]


    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

     
  2. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG][/align]​
     
    Cheapskate and arduum like this.
  3. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    well after a break I resume ..
    arrangement of the lower panel and shaping to facilitate the installation of this fantastic ASUS STRIX X-570 F gaming motherboard thanks to my sponsor PCHUNTER.it store
    unboxing here


    [​IMG]



    [​IMG]

    [​IMG]

    inside panel

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  4. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    creation of the bracket for the archive disks, I use my old ones for the size.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  5. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    well guys go ahead, the project is well under way, I do a lot of background work in this way i will get better later and i will go even faster ..

    today I prepare the supports for the internal panel that will contain the cables and the 2.5-inch hard drive storage bays, the ssd that will contain the operating system will be positioned outside.
    I create the supports from soft steel pipes on which the panels will be mounted I use a pipe cutter.

    [​IMG]

    [​IMG]

    [​IMG]

    adoro questo strumento ha un taglio perfetto...

    [​IMG]

    una volta ricavati i supporti uso la punta filettante per creare il filetto

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    ora è la volta del pannello come fatto per gli altri non sara altro che un sandwich pannelli in acrilico da 2 mm e 5 mm quello centrale che conterrà i leds.

    [​IMG]

    [​IMG]

    [​IMG]

    posizionalento dei supporti

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Cheapskate, arduum and kim like this.
  6. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    I go ahead .. preparation for external ssd positioning, they will have led covers that I will make later, I also arrange the logo of the eagle also with led.

    [​IMG]

    [​IMG]

    [​IMG]

    I fix the 2 discs to the panel with its screws

    [​IMG]

    drilling for sata and power data cables

    [​IMG]

    let's move on to the eagle it will be fixed with screws to the case, inside I will make an opening with a small rgb led strip, I will place on it the second thinner panel (2 mm) painted black, this will hide the screws, once turned on you will only see the contour with a pleasant effect.

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  7. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    proceed with the finishing of the external panel and housing ssd

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    I realized that the case begins to have a certain weight, due to the reinforcement of the legs made previously.

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]
     
    censored_Prometheus_ likes this.
  8. Cristianodanna mod

    Cristianodanna mod Member

    Joined:
    16 Dec 2016
    Posts:
    98
    Likes Received:
    18
    Nice work
     
    pccustom likes this.
  9. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    problem with the brackets of the feet I have to find a different solution or not to glue them but assemble them with screws I make them again for the third time !!!

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    I was forgetting an important thing ..... the power button !!!
    2 are a startup and one a reset.
    I place it on the bottom side on the right side panel. this consists of 3 panels
    1 outside
    1 below (for leds)
    1 of cover located inside, I have to puncture all three but with great precision,

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    the fantastic buttons sponsored by PHOBIA

    [​IMG]

    [​IMG]

    [​IMG]

    next phase, positionally led strips inside the panels and some tricks ... and we proceed to painting
     
  10. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    I know ... I know what you are thinking ... yes yes nice but the mod when it arrives?
    everything now begins to take shape, a lot of preparatory work was needed but now the time has come to paint and assemble ..
    preparation of the frame with clinging primer

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    for the anthracite gray basic covers, application of the logos cut out with a plotter and then matt black

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    censored_Prometheus_ likes this.
  11. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    painting of the first panels, base in glossy anthracite gray and then a coat of matt black.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    waiting for the panels to dry, in all there are 25 that make up the mod, I proceed with the break-ins of the intermediate panels of the sides and internal logo panel or those that will contain the LEDs, prepared for some time.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  13. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    cutting and preparing mesh for roofing panels

    [​IMG]

    [​IMG]

    [​IMG]

    [VIDEO]
     
  14. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    waiting for the painted grids to dry proceed with other.
    insertion of the led strips in the side and front and top panels.

    [​IMG]

    [​IMG]

    I use these connectors which are very easy to install, they are clip-on and there is no need to solder anything, I match them a bit because they are not at the same level as the 4 mm plexi

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    this is the intermediate panel since the covering ones are black and absorb all the light I apply white vinyl in this way the light will feed well and will also shoot on the edge

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

     
    censored_Prometheus_ and kim like this.
  15. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    assembly of the front and top covers which also house the 5 120 mm alphacool 3 fans on the top and 2 on the inlet

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

     
  16. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
  17. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    I am very happy to collaborate with this company, the CRUCIAL which, in addition to providing me with the ram, now also sends me 2 ssd BX 240 GB
    realization of internal led panels for covering.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    unboxing here enjoy!

    [video=youtube_share;RMPNgUd3S-0]
     
    Last edited: 9 Feb 2020
    lowfat likes this.
  18. pccustom

    pccustom Active Member

    Joined:
    12 Jul 2017
    Posts:
    203
    Likes Received:
    76
    finishing last rgb paneld before to the final assembling...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  19. zogthegreat

    zogthegreat Member

    Joined:
    10 Sep 2011
    Posts:
    35
    Likes Received:
    3
    Really nice work! I love the backlighting!
     
    pccustom likes this.
  20. kim

    kim hardware addict

    Joined:
    10 Jan 2016
    Posts:
    643
    Likes Received:
    209
    I agree with @zogthegreat , since you started this build, I watched it several times and it is great to discover new parts on every update :dremel::rock:, this is what I call a real talent for modding, awesomness, originality, accuracy, without the help of any machining :clap:I envy your skills :grin:
     
    pccustom likes this.
Tags:

Share This Page