It´s time for another update. I received this nice package these days. I want to thank Cooler Master for the kind support and for the trust. What´s inside? Let´s perform some Unboxing. Plenty of Cooler Master MasterGel Maker elite thermal grease. I like this thermal grease since this one is considered to be the best you can get these days, like many reviews can confirm. This amount of thermal grease will be more than enough for many other projects too. I´ve used this thermal grease for other purposes too. The package also included some nice bonus items like eg. a Cooler Master keychain, some nice emblems and some Cooler Master blankets. The most important component was a Cooler Master V550 Power Supply. Features: - Fully modular cable design - Powerful and small at the same time - Silent Silencio FP 120mm Fan - 80+ Gold certified - Up to 92% high efficiency - 100% japanese capacitors for a extended lifetime and minimal power fluctuations Specs: Model: RS550-AFBAG1-EU Type: Intel Form Factor ATX 12V V2.31 Dimension: (W x L x H) 150 x 140 x 86mm Input Voltage: 100-240Vac (Auto Range) Input Current: 10 - 5A Input Frequency Range: 63 - 47Hz PFC: Active PFC (>0.9 typical) Power Good Signal: 100-500ms Hold Up Time: >16ms Efficiency: 90% Typically MTBF: >100,000 Hours Protection: OVP/UVP/OPP/OTP/OCP/SCP Output Capacity: 550W Operation Temperature: 0~40°C Regulatory: CE/FCC/UL/TUV/RCM/BSMI/CCC/EAC Fan: 120mm Silencio FP Certifications: 80 Plus Gold Connector: M/B 20+4 Pin Connector x 1 CPU 4+4 Pin x 1 PCI-e 6+2 Pin x 2 SATA x 6 4 Pin Peripheral x 3 4 Pin Floppy x 1 This small Power Supply is perfect for this project and looks nice too. Some more Unboxing. I´ve used a Cooler Master V1000 Power Supply before which is still built in my Modified Desktop PC. Let´s have a closer look. This small Power Supply is available in 550W, 650W and 750W. 550W should be OK for this project though. The Power Supply and the cables are packed separately. A cloth bag protects the Power Supply from scratches. The cables are stuffed into the bag next to it. You also get some cable ties and 4 screws. There´s not much to say about the cables. I like the idea that these are black and I don´t have to use sleeves on them A small Power Supply which will hopefully do the job as expected. 100% modular designs are a must have in this case in order to save as much space as possible. The built in Fan is silent. I guess the cooling will be awesome since the Power Supply gets fresh air from outside of the case. And here´s a look at the Specs and efficiency again. This is just a short description of the Power Supply and not a full review since this one would be too much for a worklog. From the looks of it, it´s a nice Power Supply which also looks great inside this case. Let´s mount this Power Supply inside the case. Now you can see that this case is not as big as it might seem without any hardware inside? In fact it´s a small case which requires some thinkering around. There is a gap of about 3cm between the reservoir and the Power Supply. It´s just enough to insert the cables and to bend them a little. Quite a nice back. And how would this Power Supply look behind bars? That´s it again. I´m still waiting for the ordered glass in order to finish the second side panel.