Case Mod - In Progress CM Silencio 550 Limited Edition Update 02/04 NEW HARDWARE + COMPLETED Again

great build!!! nice shiny copper end good style!!!

but I have couple OT questions first - is there white PCB MoBo on market to match color-scheme of uch great build? AFAIR there is white PCB GFX (GF ti5*0 KFA2 or smth)
and second: what happened with this world that we have to modd case to make it white??? (yeah i'm that old )

 

Wow, this is looking nice. Only suggestion I could make would be to paint the black plugs behind the mobo tray white...

 

Thank u Kelmannen

Thx

Thanks

I don't know i am just using it to make this build for the competition. I wont be using it when it is done

Thank u

Thx

Thanks Vetalar i have seen the white pcb but i am not really a fan of it

Thx but with the side panel on it hardly see it

Update!
Got my last piece from Imatex so i can complete the front now


First i will start with filling up some holes in the front panel from the USB and card reader.







When it is hard it time to sand the front panel.



Sanded the grill also + make a small frame on the back of it so i can easly attach the RGB ledstrip to it.



Ledstrip in place



At the bottom i have made a small hole so there is enough room for the power cable



I have also made a small movie of the RGB ledstrip that i can control with a remote



Next step was to make the plexi front this needed some patience from before it was ready.
To get a perfect angled corner i had to saw 2 pieces of wood whit a corner of 78degrace these 2 pieces i would set on my table with some sanding paper under it.



The only thing i have to do is sand the plexi till i have my 78° corner on the plexi.



Few hour later and 2 pieces later i had my corners of 78°



The dirt



Now i can assemble the 3 pieces of the front together with glue





Drilling 4 hole to hold it all together against the front.



Removing protection foil this will give u a better view



Now when all the holes are made and taped it is time to paint the parts



Only room left for power and reset bottom



I have kept the original Cooler Master casebadge So i can place it on the front of the case.





All back together.







Placed the front back on the case.















The outside of the case is completed I only have to do some small improvements on the inside and then it is time for a photo shoot

I also started the leak testing of the system.

 

Excellent build mate, that front plexi 3 part panel really finishes it off well, I think my favourite bit is the brass pipe work, looks soooo good, it's tempting me to go back to watercooling

 

That looks fantastic sir

 

EPIC finish to the front good luck with the last little bits

 

Great work!

 

Subbed, starred & rep, this looks excellent mate, loving the hard polished pipe work & the modding throughout is top notch mate.

Only found out about this 1 through motm.

The front looks like an electric heater but a damn good looking one.

 

This is KillerMaster. Great job and amazing result.

 

great looking mod very impressive

I'm curious, what material did you use to fill in the holes in the front panel?

 

great mod men

 

Superb build, mate! Congrats on the MOTM nomination!

 

Those new panels are brilliant and that front panel...Oh wow, I love that, just looks superb.

 

Alain, do not change it.........it is excellent

 

BTW that's a nice method for manually sanding a certain bevel.

 

Thank u Cruelinios, its never to late to go back

Thx Jezzafool

Thanks Sarakon ^^

Thanks Waynio, a lot of people say that it looks like that kinda funny. Good thing that it cant produce heat else it would have terrible cooling

thank u Pranja

thx Snowcrash it some kind of mesh panel dad i placed behind.

thx Bond0071993

Thank Motorsportcfd for u the same

Thanks Bulldogjeff

Haha thx i wont change anything

Thanks Waynio, i had a lot of thoughts of how i would do it but this was the best way that i could think about.^^

 

Wow... Just... WOW!

 

You amazed us, now go get some more pictures of the build!!!!! Mod on man!

 

What them guys said!

john

 

thanks alain-s, but that's not what i meant (maybe didn't ask it right). what I was asking about was the specific material (filler) you've used to fill-in the front panel hole (audio, usb, etc.).

that is, i wanted to know what this stuff is: