bah kay so im here again that means ive screwed something up in my computer.. kay so i was trying out ntuner but it kept restarting computer cause my FSB cant exceed 133 .. due to cheapo ram.. so then i go OO i remember something about a ram divider in the BIOS. so i change it to 6:4 so that i can increase FSB without going over the RAM limit. then i increase the FSB to 135 just to test and see if its working, reboot. .. . . blank screen. Kay. left it a while. restart and i get "CMOS CHECKSUM ERROR - DEFAULTS LOADED" come up right after detecting IDE devices. . Cleared Cmos many times, taken battery out, but what worries me is that i cant enter BIOS by pressing del, and what worries me even more is that i cant go into the AWDFLASH to replace the bios. The computer just crashes at that message, and no buttons do nothing.. . : ( help please . . thanx everyone, sorry i seem to use this forum more for myself with all the pc problems i have than to contribute. Party AXP 2400+ (now running at 1500 mhz on post) Abit NF7-S V2,0 512 unbranded pc2100 ram radeon 9600pro 256mb 160 seagate sata Tagan 380w PSU
Use winflash? Available on the Abit site AFAIK. Good program. I'd recommend getting some new RAM - it can be had for <£20 on the forums/ebay and it's well worth it. [edit] I read it again... Doh! So the system crashes no matter what? :\ Try taking all the drives out, changing the RAM slot and resetting the CMOS. If that doesn't work, i'd recommend you try reseating the CPU (with a boot without it in), then another CMOS reset. After that there's only getting a new BIOS chip tbh. AFAIK, these guys are supposed to be very good...[/edit]
