Electronics composite to lcd

Discussion in 'Modding' started by kbn, 13 Sep 2007.

  1. kbn

    kbn What's a Dremel?

    Joined:
    17 Mar 2004
    Posts:
    603
    Likes Received:
    0
    Its a psone lcd, I would like to connect it up to a composite (or svideo) input.

    this is the pinout (from here

    [​IMG]

    I assume that socket2>pin1 would need to goto the RCA center pin.
    Im unsure what the RCA outer should connect to (ground, csync or something else?)


    thanks
     
    kbn, 13 Sep 2007
    #1
  2. Warrior_Rocker

    Warrior_Rocker Holder of the sacred iron

    Joined:
    26 Jun 2005
    Posts:
    938
    Likes Received:
    1
    Hi,

    You can connect the outer portion of the RCA wire to anything that is labeled ground. Keep in mind that Composite is for the most part a 1 pin interface with a sheild wrapped around it.

    Same goes for the audio wires as well.
     
    Warrior_Rocker, 13 Sep 2007
    #2

Share This Page