1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Cooler Master ATCS-840 TRON EVOLUTION MOD

Discussion in 'Project Logs' started by pichicho, 19 Aug 2011.

  1. pichicho

    pichicho New Member

    Joined:
    16 Aug 2011
    Posts:
    3
    Likes Received:
    0
    Hi guys I bring a new modding this time will Evolution Tron, and the case will be a Cooler Master ATCS-840; This is a very roomy aluminum case which will make the following changes:

    • Cut a window in the side and install a 5mm acrylic.

    • Modification of the fan grill on the bottom and back. (Possibly also the top)

    • Convert the entire exterior carbon fiber type.

    • Installation of Tron Light Strip type on the sides.

    • Installation of RGB lighting (LED's with the full range of colors) by remote control.

    • Dual 850W power supply. Each.

    • Change the LEDs of the fan's white color and do not come with LEDs will adapt them.

    • Install rack's for two SSDs.

    And other things that go out on the road if the muse inspires me. (Suggestions accepted)

    Well some pics of the case and a small advance on the right side panel to give an idea of what the Mod.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Preview of the side panel and some applications in acrylic.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Hope you like it and leave your opinions.

    Greetings and good Modding
     
  2. pichicho

    pichicho New Member

    Joined:
    16 Aug 2011
    Posts:
    3
    Likes Received:
    0
    Hi Guys I leave more progress here:

    [​IMG]
    So you will see the case, carbon fiber type.
    Is a video of how to install:

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    Some of the fan's.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    Also change the CrossFire cables

    [​IMG]
    The two power suply.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    Here you can see the Cable Management and adaptation to enable them to operate two power suply.

    [​IMG]
    It was made a cover for the back of the bays there be installing two SSD drive.

    [​IMG]

    [​IMG]
    The controlled RGB LED's and remote control.

    [​IMG]
    Fan's for the radiator in Push / Pull

    [​IMG]
    A test of how they will be Led Strips (not yet defined where they go)

    [​IMG]



    Well I hope you like it and leave their opinions and ideas.

    Regards
     
  3. pichicho

    pichicho New Member

    Joined:
    16 Aug 2011
    Posts:
    3
    Likes Received:
    0
    Hi sorry for the delay but I was short of time for various events and the opening of the store, so I return to modding and I bring you photos of the final hardware already mounted and some photos of the event which introduced the PC. And the simulator that I manufactured.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Well I hope you enjoy and leave comments.

    Regards
     

Share This Page