1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hardware Cooler Master Hyper TX3i Review

Discussion in 'Article Discussion' started by Combatus, 9 Feb 2016.

  1. Combatus

    Combatus Bit-tech Modding + hardware reviews Lover of bit-tech Super Moderator

    16 Feb 2009
    Likes Received:
  2. amagriva

    amagriva Minimodder

    13 Jun 2009
    Likes Received:
    It's better to point out that the Revision B of the Thermalright Macho is to reccomend. The difference between the two revisions is eleven degrees! The Macho Rev.2 also works passive but I dont't know if the eventual inclusion of his result in this mode in the chart is proper
  3. Dan848

    Dan848 What's a Dremel?

    25 Sep 2009
    Likes Received:
    I built this system almost 4 years ago. Because I do not have a lot of money I want my systems to last a long time.

    I use the Noctua NH-C14, although most people use a "tower" cooler to clear tall RAM sticks or mosfit heat sinks. I recently checked this cooler with my Intel i5 3570K overclocked to 4.0GHz and it consistently kept the CPU 7 degrees C above ambient ROOM temperature at idle. [Cooler Master HAF 922 case, three 200mm fans, one 120mm fan.]

    4.0GHz is not a huge overclock and voltage is ~.9 volts. I have had the CPU to 4.8GHz but it needs too much voltage and I do not like temperatures above 62 degrees C, so, that meant no more than a 4.4GHz OC. With most games I have found that 4.0GHz works fine with a MSI GTX 980 Ti Lightning LE with a screen resolution of 1080p. [Microsoft Flight Simulator X is one of the few games/simulators that needs a lot of CPU power.]

    Please include at least one good Noctua cooler review to put in your comparison chart. Thank you.
Tags: Add Tags

Share This Page