Cooling Issues

Discussion in 'Hardware' started by customh, 17 Jan 2006.

  1. customh

    customh conflagration.

    Joined:
    22 Oct 2005
    Posts:
    2,590
    Likes Received:
    1
    [​IMG]

    Are these sinks any good? Im looking for a $40 or under solution with shipping (an air heatsink) and there is one somewhere i can get for 35 like this but its socket A. Are they good? Reason i want one being i have one in this sytem and CPU temps usually run around mid to upper 40's and i dont like that. Should stock HSF be this hot? should i just try Arctic Silver first?
     
  2. Neoki

    Neoki Minimodder

    Joined:
    26 Oct 2004
    Posts:
    951
    Likes Received:
    2
    try AS first and then follow their instructions on their site. Tell us your temps then with screen shots. have a look at some thermalright Heatsinks.
     
  3. Shadowed_fury

    Shadowed_fury Minimodder

    Joined:
    21 Nov 2003
    Posts:
    7,506
    Likes Received:
    21
    Stock? Not that bad really.
    A reapply might take you a bit under, but I doubt that much.

    FYI, those sinks are the ****. They rock.
     
  4. customh

    customh conflagration.

    Joined:
    22 Oct 2005
    Posts:
    2,590
    Likes Received:
    1
    Shadowed: Should I get this one i can for 35 as i imagine it can be found easily for that price as its socket a.....Will it bring my temps down significantly?
    Also Thanks, looks like AS will be ordered shortly anyways
     
  5. Payne280

    Payne280 What's a Dremel?

    Joined:
    19 Oct 2005
    Posts:
    162
    Likes Received:
    0
    I would suggest a Thermaltake Big Typhoon, but it is a little above your price range, but it is the best air cooling around
     
  6. customh

    customh conflagration.

    Joined:
    22 Oct 2005
    Posts:
    2,590
    Likes Received:
    1
    No socket a suppoert in big typhoon i dont believe, but if someone tells me differently that i trust ill buy one
    I found 3 and want approval if the big typhoon doesnt support socket a
    #1
    [​IMG]

    #2
    [​IMG]

    [​IMG]

    #3
    [​IMG]

    [​IMG]

    If/ since these are all the same model should i just get the cheapest one? Are they good also?
     
    Last edited: 18 Jan 2006
  7. Mister_Tad

    Mister_Tad Will work for nuts Super Moderator

    Joined:
    27 Dec 2002
    Posts:
    13,329
    Likes Received:
    1,583
    there are a few different swiftech models

    MC462 - the original, smooth pins with copper base
    MCX462 - copper base with ridged pins
    MCX462+ - thicker copper base with a few more ridged pins
    MCX462V - The one 462 version of the pic in yout first post

    each one is a bit better than the one before

    #1 looks like a MCX462 and the latter two MCX462+
     
  8. customh

    customh conflagration.

    Joined:
    22 Oct 2005
    Posts:
    2,590
    Likes Received:
    1
    So which one in post 6 should i get? What would price diff be if i got the new one with the tilted pins (like in first post) Would the one in first post give me A LOT better cooling than the ones in post 6? If so id consider it. Id like nembers here (degrees C)
     
    Last edited: 18 Jan 2006

Share This Page