Hardware Corsair Carbide Series 600C Review

All this experimentation with different case orientations.

I don't know why more manufacturers don't use Silverstone's 90 degree orientation so the hot air is all expelled out of the top of the case. It's the most obvious use of thermodynamics, to have the hot air follow the path it wants to follow.
Having said all that, i'm pretty sure Silverstone have gone away from that orientation as well, shame.

 

Why are the "click on" pics so small? I'm running 4k here the squint fest is unbelievable.

 

Same here, the pics are small even with my lowly 1080p res. I also think that cases with "hot swap" bays that don't have a backplane are just half a job.

 

I actually like it. But a bad little case. So happy they hiding the psu

Sent from my HTC One M9 using Tapatalk

 

Would be interesting to see the performance when reversing the airflow, having the rear and bottom as intakes and the front as exhaust.

 

what is the clearance of the bottom rad point- will it fit a 60MM rad plus fans? will it also fit with same rad in front location as well?

 

I did some testing with the 600C
Bottom 360/45 will do push/pull if you remove the frontmost 3.5" HDD Cage.
Additional to that a 240/45 or 240/60 will be possible in push/pull, leaving enough space to fit a 980ti reference
http://www.overclock.net/t/1582467/...00q-inverted-atx-full-tower/300#post_24770566