Memory Corsair Vengeance 12GB Memory Kit

Discussion in 'Hardware' started by happyhammer7, 20 Nov 2011.

  1. happyhammer7

    happyhammer7 What's a Dremel?

    Joined:
    19 Oct 2009
    Posts:
    604
    Likes Received:
    13
    Hi all,

    I need to check the compatibility of the following Corsair memory -

    http://www.lambda-tek.com/CMZ12GX3M...1600MHz-DDR3-DIMM~cs/2123071&origin=gbase19.5

    Is this compatible with the following boards -

    http://www.ebuyer.com/241996-asus-s...annel-hd-audio-atx-motherboard-sabertooth-x58

    http://www.ebuyer.com/195331-gigaby...-8-channel-audio-atx-motherboard-ga-x58a-ud3r

    Currently have a Gigabyte X58A-UD3R but looking at selling it for the Asus Sabertooth, just for a change, so just wanted to make sure the memory works with both boards.

    Also, has anyone used Lambdatek before? Seems a ridiculous price for the memory and not too familiar with them
     
  2. Tangster

    Tangster Butt-kicking for goodness!

    Joined:
    23 May 2009
    Posts:
    3,085
    Likes Received:
    151
    Should be compatible with any x58 board. Lambdatek are above board, bought a few small items off them before. You could give them a ring to confirm that's the actual price.
     
  3. j4mi3

    j4mi3 What's a Dremel?

    Joined:
    28 Jun 2011
    Posts:
    1,033
    Likes Received:
    17
    only dealt with lambdatek once, for my first build. i cant say i was that impressed, primarily because their system builder thing is a bitch to use, and its supposed to tell you if stuff isnt compatible, but it said a mobo was when it wasnt so that wasted £80

    i much prefer scan or ocuk nowdays
     
  4. happyhammer7

    happyhammer7 What's a Dremel?

    Joined:
    19 Oct 2009
    Posts:
    604
    Likes Received:
    13
  5. Tangster

    Tangster Butt-kicking for goodness!

    Joined:
    23 May 2009
    Posts:
    3,085
    Likes Received:
    151
  6. happyhammer7

    happyhammer7 What's a Dremel?

    Joined:
    19 Oct 2009
    Posts:
    604
    Likes Received:
    13
    That makes 2 of us. Seem to have loads of reviews online and mostly positive.
     
  7. happyhammer7

    happyhammer7 What's a Dremel?

    Joined:
    19 Oct 2009
    Posts:
    604
    Likes Received:
    13
    I have heard that this RAM is good for overclocking. I have never done this before. Does anyone have any experience in this area at all?
     

Share This Page