1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress "Cosmos Dragon" - 040809 - GC Online

Discussion in 'Project Logs' started by thechoozen, 23 Sep 2008.

  1. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    thx m8´s!!!

    today we checked everything and found out that the cable from the psu (original cable un modded) was broken so everytime you touch the cable the leds light up you let the cable loose they don´t work.....after we found out was the problem was it was easy to solve...just a new cable and everyting was fine....the spike from the sidepanel is also back in place so that we just had to rebuild the stolen front door....(thats a good result for such an exhibition...:thumb: )

    after we fixed the problems we made a first OC test to see how good the phenom performs and we could easily push it up to 3.9 ghz (without giving more voltage)....we also made a few benchmark runs in 3dmark06 and here is one of the results.....

    [​IMG]
     
  2. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    today we started to overwork the next add on part for the cosmos....we started to disassemble the 5.1 box from a medusa headset ....beside that we already prepared a few plexi layers from which we build the new housing....

    [​IMG]
    [​IMG]
    [​IMG]

    i also managed to upload a short video from the cosmos @ the cebit ....

     
  3. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    That is a very nice OC, nice work.
     
  4. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    thx!

    today we did a bit of progress on the new Medusa 5.1 enclosure....we already drilled all holes for the Power LED, the Headsets and all other cables.....

    [​IMG]
    [​IMG]
    [​IMG]

    beside that we started to take out the inner part.....

    [​IMG]
    [​IMG]

    we also cut and glued some plexirods together.....as soon as they are sanded and polished we will make a cover for the small crossfire x bridge....

    [​IMG]
     
  5. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    Even a custom Crossfire bridge cover, WOW.
     
  6. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    thx :thumb:

    today we made some further progress on the medusa box and the crossfire bridge but here are some new pictures so that you can seee....

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  7. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    The Medusa box looks very cool as does the crossfire bridge.
     
  8. Burnout21

    Burnout21 Is the daddy!

    Joined:
    9 Sep 2005
    Posts:
    8,614
    Likes Received:
    197
    i bet who ever broke the case has viewed the project log here or where ever else you have posted it all, and got jealous and had to break it. immature little F***!
     
  9. perplekks45

    perplekks45 LIKE AN ANIMAL!

    Joined:
    9 May 2004
    Posts:
    6,317
    Likes Received:
    658
    :jawdrop: ... again!
     
  10. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    thx m8´s!!:clap::clap::clap:

    today we made some further progress on the cf-bridge.....we made a backside for it so that the real bridge is fixed between both layers....we also started a cover for the first gfx card...but its only a rough cut up to now......

    [​IMG]
    [​IMG]
    [​IMG]

    beside that we nearly finished the medusa 5.1 box....

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  11. brinkz0r

    brinkz0r New Member

    Joined:
    15 Dec 2006
    Posts:
    612
    Likes Received:
    4
    The medusa box is very well executed, and you gotta love that CF bridge!
     
  12. Mokey Mokey

    Mokey Mokey New Member

    Joined:
    9 Mar 2009
    Posts:
    143
    Likes Received:
    2
    I too love how you took time to make the crossfire bridge look sexy! :blush:
     
  13. perplekks45

    perplekks45 LIKE AN ANIMAL!

    Joined:
    9 May 2004
    Posts:
    6,317
    Likes Received:
    658
    It's that attention to detail that made me vote for you in MotM. :)
     
  14. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    +1billion lol
     
  15. luis_pedro_Sato

    luis_pedro_Sato Member

    Joined:
    29 Nov 2004
    Posts:
    127
    Likes Received:
    0
    Love your work
     
  16. .Fatality.

    .Fatality. New Member

    Joined:
    10 Jul 2008
    Posts:
    146
    Likes Received:
    0
    totaly like it! awsome case!
     
  17. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    thanks for all your comments!!! :clap::clap::clap:

    Today we made some small feets for the medusa box.....after everything was cut out.... we glued the parts together.....sanded + polished everything.....after that we attached them to the medusa box....et voila....nearly done....

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    as next we will change the red Power Led for a green one and change the color of the poti ....

    beside that a package with sleeving material arrived so that we can overwork that part too....(not everything on the picture is for the cosmos)....
    [​IMG]
     
  18. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    today we made some progress on the gfx card cover....


    [​IMG]
    [​IMG]
    [​IMG]
     
  19. thechoozen

    thechoozen Active Member

    Joined:
    9 May 2006
    Posts:
    913
    Likes Received:
    69
    today we bended an old piece of mesh which only lays around so that it fits inside the hole of the gfx card cover....


    [​IMG]
    [​IMG]
     
  20. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    When will you guys stop lol. The medusa box turned out superbly and the GPU back plates are looking just as good.
     
Tags:

Share This Page