Modding Crap! Help!

Discussion in 'Modding' started by neverborn, 6 May 2004.

  1. neverborn

    neverborn What's a Dremel?

    Joined:
    6 May 2004
    Posts:
    2
    Likes Received:
    0
    Okay, so I installed some stuff. Like a lot.

    I'm thinking this is a power problem, but not sure.

    Out of 3 Speeze LED fans, two are tealish in color. Not sure if this is power or just crappy LEDs.

    Out of 4 Thermaltake CCFLs, two don't work. At all.

    The Nexus fan controller's LEDs light up, but knobs don't do anything.

    So I ponder if it's power or not.

    On Antec TruePower 550W:

    Power#1: DVDRW->DVDROM->HDD
    Power#2: CPU HS/F->ATI RADEON 9800XT
    Power#3: 4 CCFLs->2 Fans->Fan Control
    Power#4(FAN ONLY): 3 Fans.
     
    neverborn, 6 May 2004
    #1
  2. Go4t

    Go4t i

    Joined:
    13 Dec 2003
    Posts:
    939
    Likes Received:
    1
    which fans are plugged into the fan controller?
     
    Go4t, 6 May 2004
    #2
  3. Murdoc

    Murdoc Gas Mask..ZOMG

    Joined:
    25 Jul 2003
    Posts:
    2,496
    Likes Received:
    1
    Take everything out, then plug a few things in at a time and test as you go, should have been the way you did it to start with tbh.

    'doc
     
    Murdoc, 6 May 2004
    #3
  4. modsquad

    modsquad Grease Monkey Undergraduate..

    Joined:
    27 Feb 2004
    Posts:
    2,279
    Likes Received:
    6
    That sounds like the best thing to do.
     
    modsquad, 6 May 2004
    #4
  5. Furymouse

    Furymouse Like connect 4 in dagger terms

    Joined:
    4 Feb 2004
    Posts:
    621
    Likes Received:
    22
    I am running alot more than that on a antec 430( I think )
    There might be some sort of a rail prob, or .......
    are there dedicated fan lines on that psu, cause on mine, if I used those on anything but fans they just wouldnt work
     
    Furymouse, 6 May 2004
    #5

Share This Page