1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress <<<<< Custom Parvum R1.0 - "Kinetic Energy" >>>>>

Discussion in 'Project Logs' started by Mads1, 26 Jan 2016.

  1. Mads1

    Mads1 What's a Dremel?

    2 Apr 2015
    Likes Received:

    Hi All

    This is my first build log on bit-tech
    Just a little bit about me, i suffered a work accident that left me paralysed and a blood clot on the spine, i was told i probably wont walk again, but through lots of effort im now back on my feet albeit
    problems walking any sort of distance. Ive met some amazing people on the way and have become friends with someone who's son suffers from Spina Bifida, they haven't alot of money
    so i decided to give him my Previous Parvum Build, which i previously built not that long ago, which is why im doing a new build. Now im supporting this charity, im going to give my builds away so they
    can raise money for these kids in there community auctions/raffles and also one of the kids will get the PC, all of which comes out of my own money, so one it gives me a hobby
    and two it goes to a good cause.
    i'd like to be able to do a couple builds a year but it depends on funds as it takes a little while to save up, plus i can use the PC until i can get the funds for the next one.

    This is going to be my first Acyrlic tube build aswell so it will be great learning curve.
    i hope you will follow me on this journey and i hope to learn from the bit-tech community as a whole.

    Also i want to say a massive thanks to the Parvum boys ( Justin, Shaun, Joe and Steve ) Everytime ive gone down to their HQ to update my Design they have always made me feel welcome, and its nice
    to sit and chat to hear their plans of what is coming up in the Parvum World.
    Ive still to get the Hardware but will add Pics and Updates as and when.


    Case: Custom Design Parvum R1.0 360
    CPU: Intel Core i7 5820k
    MB: Evga Micro V2 X99
    GPU: EVGA GTX 980Ti
    RAM: Corsair Dominator Platinum 16GB (4x4GB) DDR4 PC4-21300C15 2666MHz Quad Channel Kit
    PSU: Still Not Decided
    HD: Seagate Barracuda 2TB
    SSD: Samsung 500gb 850 evo ssd.
    Samsung 500gb 850 evo ssd.
    Samsung 950 Pro 256GB M.2 NVMe O/S

    Water Cooling:

    1x EK Supremacy EVO or HEATKILLERĀ® IV PRO
    1x EK-FC 980Ti/Titanx or HEATKILLERĀ® IV XL for GTX 980 Ti and TITAN X - ACRYL Ni with Back-plate
    1x EK Revo Combo Res D5 140
    2x Darkside LP 360mm or EK PE 360mm Rad
    Mayhems or EK coolant
    a lot of fittings Bitspower or EK 12mm/OD
    PETG tube 12mm OD + EPDM soft tube
    Aquaero 6XT


    Telios Carbon, black or F/Red


    Darkside LED White Strips 12cm x 4
    ModMyToys power distributor & cable clips

    Case Renders:

    Last edited: 26 Jan 2016
  2. Cheapskate

    Cheapskate Insane? or just stupid?

    13 May 2007
    Likes Received:
    Cool idea. Good luck on the raffle.:thumb:
  3. Mads1

    Mads1 What's a Dremel?

    2 Apr 2015
    Likes Received:
    Thanks. :thumb:

Share This Page