Discussion in 'Project Logs' started by pccustom, 17 May 2020.
YAIBA TO ALL! today a lot of work, I leave the rear part suspended to focus on the front, I make a panel of solid recycled steel from my HP desktop, the metal structure of these old houses is really impressive solid and thick sheet metal, the empty case already has its considerable weight.
here it is
to install the 360 mm radiator I need supports but at the same time I need to strengthen the structure, let's start ..
measurement control and positioning ...
now the most interesting part
I finish with precision files always checking the measurements
I am very satisfied with the result considering that I have no specific equipment and I made everything with basic tools
and if I can do it, anyone can do it.
check that everything concludes.
fastening with rivets, I always check the measurements
the structure is now much more solid and stable.
to be continued---
Recycling !!! All I love...!!!
Nice clean work
Who need a CNC if you can craft it.
Nice work i like it
great great great work
They just keep getting better!!!
a lot of work today ...
processing of the tray, very important as it is an integral part of the structure
technical dimensions tests
positioning of the bracket that will fix the inno3d RTX2060super TWIN X2 video card vertically, here helps me coolermaster who sends me a special bracket designed for his houses but that is fine for what I need
but it's not over I have to find a way to fix it firmly to the panels.
motherboard placement and holes
I have an envelope full of spacers I always take them apart before I get rid of an old case
creation of the hole on the tray to facilitate the installation of the fixing plate for the CPU waterblock
once you have decided what to do, prepare all the holes for the gpu support bracket
after taking the measurements well 3 times I proceed
I practice very small holes
one points it as a cutter and patiently floods all the holes connecting them creating a groove
I help myself with a precision file (one of my best purchases)
it is not yet finished all the tray block must still be well worked .. and the panels made previously must be revised (they are too large)
How did you cut the plexiglass?
not all parts can be cut in the same way, generally I use a motorsaw dremel, but I also use a normal hacksaw and sometimes a sharp hook with which I engrave the plexiglass up to cut it, in some cases I use a "rasp" wood file to consume the excess one and then I finish with 220 sand paper.
This will look beautiful once done. Love your craftmanship!
thank you soon updates..
rear panel added reinforcement elements
I will add 2 more "sandwich" wings with leds in the center 2 acrylic panels painted with another acrylic panel with leds in the center
in addition to strengthening the structure, it will have an aesthetic value, 2 D-RGB strips inside these fins
Loving the stance this has already!!! Jeesus even i don't do that much plex cutting by hand.... It's a testament to how much time you have to spend on these builds!
thank you so much!!
This Is Amazing!! Cant wait for the next Update!
completion of the 2 rear led panels
I love how you're working with acrylic plastic! Really got some inspiration! ❤
after a short pause he resumes
creation of the arms with front and rear shock absorbers 150 NW more than enough to support
the whole structure
guest of the day christened PISELLINO.
mounting brackets on the frame
holes for fixing the shock absorbers I leave a little bit of play so they can be adjusted
Separate names with a comma.