Discussion in 'Project Logs' started by pccustom, 17 May 2020.
additional rear brackets are required
I believe that the direction I have taken is now clear
Ive never seen a modder get such amazing value out of a single material ! what you do with hardware shop alu is amazing
I am surprised by the shocks' position and the way you are working with them.
Your are proving that with simple tools but great effort and commitment it's possible to make amazing creations!!
How did you bend the aluminum?
I have not folded aluminum but everything is held together by rivets and screws, but you can simply fold aluminum and steel by favoring a small groove with a very straight dremel and then folding it very easily even with your hands.
I am impressed by how you continue to innovate and doesn't cease to renew in originality
thank you kim!
Arrangement of the pigtail, as it is I don't like it is too linear to the frame
an indentation must be created and the fairing will have a fold therefore a more dynamic design.
First I evaluate where to cut
cutting little material will allow me to tilt the aluminum easily
just enough to achieve the desired effect, I end up fixing an aluminum bar with rivets and the structure is very solid
a little trick that makes the difference in the overall design.
Very on point I'd love to start seeing you weld these frames Your bends and rivots are amazing work. But the frames them selves are the true work of art here not the plex.
Welding and then filing to a perfect finish would be next level
thank you I don't have a welder and I can't do this service from others it would cost me too much, so I have to do this with an economic but robust method, rivets and screws are the best thing, I'm glad you like my mod but believe me I don't do anything special in 2012 the mods were made like this with rivets and putty for the bodywork, many have forgotten this, I follow your Hyper Case DM-01 I must say that it is unsurpassed is for me a point to follow for my next projects, I will ask you something in process that you used ..
Old but gold if well done
small reinforcements added to stabilize the structure
as well as reinforcing they will be an excellent decorative element
the fabulous EKWB EK connect controller has arrived in addition to the classic functions
there are as many as 3 excellent temperature sensors coupled with EK Vardar X3M D-RGB fans
here the unboxing
well guys we proceed, this is the turn of the crankcase / turbine of the bike it will be a grill and under it I will put a 200 mm RGB fan
but how to make it happen? I invent something ...
fixed with adhesive for temporary acrylic after I will apply a more powerful one to consolidate everything.
to make a perfect hole I build a tool, dremel has been supplying it for years I don't want to spend 30 euros for a piece of iron and plastic.
so I decide to find it myself, I take advantage of the supplied cutter support.
This bar is usable on any mini tool.
here the project.
that's where I'll make the hole.
thanks to coolermaster for providing me with this magnificent rgb coolermaster fan with awkward dimensions .. well 200 mm
a big beast ... that's where it will go.
here a brief unboxing ...
technical positioning tests
let's go ...
here it is at work .. the bar behaves well is very smooth you have to proceed very slowly
as the pieces of acrylic tend to melt with the heat blocking the tip.
clean from the chips generated every now and then ..
use the 3d printer because I don't have it.
but as usual I will try to do something beautiful and above all that costs little ...
And beautiful it is
That is soooo cool !
Really impressive work. I love the way you are taking with the mod
thank you guys!
Nice tool, I saw your video on Instagram with it. I should make myself one too if that's okay for you?
Separate names with a comma.