Hello again. Not giving to much away on the case ATM. But it is well under way. if anyone wants to know how the can it still be opened I'm making it so all the panels can still be removed. To start the ball rolling here is the Mobo process. The Mother Board going into the Doom build is the ASUS Sabertooth X99 2011-3 The link can be found here : https://www.asus.com/au/Motherboards/SABERTOOTH_X99/ I think a very cool looking Mobo to start with for the Doom case. and should work well with the theme with it's armor plate cover. What I like most about this Mobo is all the extra bits that come with it like the PCI-e covers and a plug for every thing plus a fan that can be add to the Mobo for some better cooling that I'm going to be using. Plus you get 4 ram bank fillers to hide the empty ram slots. as well as 3 thermal sensors that plug into the Mobo. So to start off I have removed the Armor to get it ready for it to be painted in silver. Ok here come all the PC goodness so I wont do much more talking as I know most of you will just look at the pretty photo's All Silver. Adding a small amount of yellow. more yellow will be added to the inside of the case later. Here I also repainted the text onto the hole mobo. to make it all stand out. For the next photo's I have done a small amount of weathering on the Mobo. Thanks to Cooler Master and AVEXIR I get to use some sweet looking BLITZ Series AVEXIR Ram. You just have to love how good there ram looks. But I'm still going to mod it just a bit. to work in with the look of the Mobo. Black. Now silver. And now even sexier then before. Here is the Mobo completed That it for now, As always thanks for stopping by.
Hello again. First off for this week Cooler Master sent me some A cool t-shirt and a drink container for being part the the Cooler Master World Series. Thank you CM I will wear it with pride, :thumbup: Sadly Ive been told I look bad in photos. What do you think ? I was Home Alone at the time. and was a bit scared when the flash went off So the build is still moving along, I started off making a airlock door. and some rails for the inside and some other parts, then moved on to the case again. The Rails relay suck to make. just my 2 sense worth. And yes I need to make more! :upset: All of this build is hand made, cut out mostly with a sharp blade and other hand tools. Still adding to the look of the case as I go. Below is where I'm up to so far. Some parts are being shaped with sign foam to make it a bit quicker. That's about it for now. I'm waiting for the water cooling gear from Bitspower to arrive then I can start getting the inside up and going as well. But for now I'm trying to get the outside all done, Not all that much more to go on the outside. just lots of small bits. Again thanks for stopping by.
Hello again. Here are some more photos again hope you like them. elevator door. elevator power box. and will light up. More elevator parts. this is the top cover. And for the rest. Hope you like them Still looking to add a vent here. Still lots more to do. and more to add to it as well, I hope you all like how it's coming together let me know what you think all feed back is welcome Thanks again for stopping by.
your painting looks really good - would half expect the machine to blow up or short a fuse when pressing the power button
Doom PC still going strong, Received some Very sweet looking cables from modGuru and made some small changes to them to match the inside of the build. Added a grill the the top of the case. Now painted I have also finished off the back side panel to help make it blend into the case. After adding some more weathering to the side panel I think it now just works with the rest of the case. Thanks Again for stopping by.
Thanks WarBoys Hi, It update time again and I'm sure some of you are keen to know what the inside of the Doom case is starting to look like, So say no more! ASUS 970 GTX Being changed over to water. Thanks to Bitspower Ok here is the photo's you been waiting for. Tubing and floor plates for the case and GPU.I will still be adding more to the plates. 2x140 Coolermaster fans get a new look for the top 280 rad. This should give you some idea as to the look of the inside of the Doom case. And before someone asks why there is one the tubes running across the center, When the side panel in on the pipe can be seen sitting just above the two top windows from the outside of the case. will add some photos of that tomorrow. Hope you all like it. Thanks again for stopping by.
Hi Main Doom door, It's small for a door and need a bit more detailing but It's a Door. Plus I finished off part of the lift. and the side windows show some of the cooling inside. Thanks again for stopping by and having a look.
.......WOW! The quality of your builds are just insane, 11/10 would agree! Great Job! Thought The power cell would be your last build? Good it wasn't
Hi every one, The Doom build is just about done, Just some small details to go. Sadly there will be no cooling fluid added to the build for some time to come as I don't have a CPU for the build yet. Thanks again for stopping by.
Wow mate your builds are simply amazing! That doesn't look like a PC case anymore. Love your work. Keep it up
