1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Epox 8KHA+

Discussion in 'Article Discussion' started by WilHarris, 29 Dec 2001.

  1. SGM

    SGM What's a Dremel?

    Joined:
    18 Jan 2002
    Posts:
    15
    Likes Received:
    0
    I suppose so, just adds more to the list though e.g. RAM, decent heatsink

    Anyway, I just visited Epox's newsgroup and found this reply to a poster who was having problems with his/her power, hope it helps someone.

    >Possibly the 300W PSU is not up to the job.
    >EPOX Tech recommend at least 350W with a combined power >output of at least 190W.
    >
    >Saying that, some people are running quite happily on a 300W >PSU.
    >See if you can borrow a better PSU and try that just to make >sure.
    >
    >Flymo
     
  2. Will

    Will Beware the judderman...

    Joined:
    16 Jun 2001
    Posts:
    3,057
    Likes Received:
    2
    My Asus's core and 5v rails drop pretty far now I've added my GeForce 3 :( so much so that I am unable to be 100% stable when overclocked to 1.678Ghz.....i cant install Windows on it when overclocked as I could before. My Enermax 350 lets the core voltage drop to 1.8v from 1.85, which is enough to make it unstable.......5v line also drops to 4.78 under load which aint good

    Sparkle 350w or 400 looks my best bet if I stil want to overclock......time to shell out yet again on a PSU :mad: oh well...
     
Tags: Add Tags

Share This Page