Hey, Im gona paint the inside of my PC case with some floeresent paint and i wanna know what you all think about which color to use, i was thinking: *i,ll pick ONE and only ONE unless anyone has a cool idea*..orange, lime green, yellow, red...ive got a bl00 CCFL in and im gona get a gr33n one soon aswell..i was thinking about lime green but im not sure..whatcha all think P2D
if you are using UV paint then get a UV black light. I would stick to one colour though rather than mix blue and green. I allways think one colour looks that bit better
It'd be nice to know what color your case is. Do you have molding around the window? If so, have you considered transluscent molding? Some colors bleed through it and have a greater affect (good). When you say flourescent paint, I am supposing it is UV sensitive that you have in mind. If you plan on using other UV mods such as cabling, molex, fans, LEDS, sheathing or wiring then painting your entire case that same color can overwhelm the view. Have you considered your total picture?
i wasent thinking about UV, i was just thinking painting the inside of the case to make the mobo and stuff stand out alot more, the case is silver at the minute but im getting a Vapochill soon so i might aswell see what i can do with this PC case..any ideas are more than welcome *actually, ideas are WANTED* "edit" heres a few piccys.. http://www.pcmodz.20m.com/cgi-bin/i/images/top,side_and_front.jpg http://www.pcmodz.20m.com/cgi-bin/i/images/case_side.jpg P2D
heres a hole bunch: http://www.pcmodz.20m.com/images/ its a lame pre-mod that i got on a day trip to edinburgh and its a good case, no less than 7 80mm fan mounts *the one on the side panel has a 80-120 adapter on it for a large exhaust fan* but if anyone has any ideas on what i could do with it them please tell me P2D
I just had a little think, and i realised i aint got a clue what i gotta do to the *steel* before i paitn it? do i need a primer or just sand it?? or be really lazy and just paint it? P2D
Silver is good with translucent molding. If you want your MOBO and *stuff* to stand out then a plain flourescent paint won't accentuate it as well. If you have white anywhere on the board or you paint it carefully, then you can highlight the board under UV dramatically. Place a light of the UV color that you will be using in the case also. Having both choices on seperate inverters (each with its own switch) will give you the option of having pure UV, no UV, lights, lights & UV, and nothing.
Better ask that in the forum as a seperate question where people from over there are likely to see it. I found it difficult to obtain without buying an entire window kit. Also, there is Googol.
