1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Other Games Workshop

Discussion in 'Gaming' started by [ZiiP] NaloaC, 17 Jan 2011.

  1. Kehoe

    Kehoe Member

    Joined:
    9 Aug 2015
    Posts:
    222
    Likes Received:
    3
    Hey guys hoping all is well, the titan is coming along slowly, but awaiting some bits n bobs for it, but in the mean time looking into another project i am trying to light up a model any one good with electronics ?

    scary i studied it at school but in the 20+ years since i left its all gone, Below is the circuit i designed to fit the model but i am starting to rethink it that i might have to go from 3 leds in a row to 2, due to the limitations of the Battery,

    Any help would be greatly appreciated

    circuit.png
     
  2. Almightyrastus

    Almightyrastus Rule #9

    Joined:
    21 Mar 2002
    Posts:
    5,594
    Likes Received:
    329
    Yup, you'd be best off dropping those strings of 3 down to 2, giving a forward voltage per string of either 3.3 or 6.6 v. 2 x blue LEDs should be more than bright enough for most model scale things.

    For the dual LED strings, you'd need a 120 Ohm resistor in line and for the single LED runs, a 270 or 330 Ohm (bang on value would be 285).
     
    [ZiiP] NaloaC likes this.
  3. Kehoe

    Kehoe Member

    Joined:
    9 Aug 2015
    Posts:
    222
    Likes Received:
    3
    circuit (2).png View attachment 49484 New & improved circuit, I found 300ohm they any good ? or am i better with the 330 ?
     
  4. Almightyrastus

    Almightyrastus Rule #9

    Joined:
    21 Mar 2002
    Posts:
    5,594
    Likes Received:
    329
    300 will be fine
     
  5. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
  6. [ZiiP] NaloaC

    [ZiiP] NaloaC Well-Known Member

    Joined:
    9 May 2008
    Posts:
    4,576
    Likes Received:
    214
    Not really a tabletop matter, but it certainly is related...

    I may have set in motion the final things to purchase an original piece of artwork from Mark Gibbons :)
     
    Almightyrastus likes this.
  7. Almightyrastus

    Almightyrastus Rule #9

    Joined:
    21 Mar 2002
    Posts:
    5,594
    Likes Received:
    329
    Very cool. When I worked there I had so many opportunities to get original sketches and doodles. Never got any though, I really wish I had.
     
  8. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    [​IMG]

    Current progress on my knights and Warhound Titans
     
    [ZiiP] NaloaC and Almightyrastus like this.
  9. Blademrk

    Blademrk Why so serious?

    Joined:
    21 Nov 2003
    Posts:
    3,982
    Likes Received:
    83
    Picked up the new shadespire, new Nighthaunt incoming (once I get around to building them)
     
  10. Almightyrastus

    Almightyrastus Rule #9

    Joined:
    21 Mar 2002
    Posts:
    5,594
    Likes Received:
    329
    More Orkses!!!!!!


     
    [ZiiP] NaloaC likes this.
  11. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    [​IMG]

    Small update to the Titan

    decided to give some upper leg detail markings
    ( ignore the piss poor paintjob )

    Also finishing up on a 27 hour long Upperbody print, the Mk3, with the 'shoulders' and rear vents already modelled on so i dont have to print them separately and it saves a little plastic, also pre-modelled magnet holes for the arm options, i just keep tinkering with the design, this is alredy the third upper, with a visible improvement across the liniage, the Mk 1.5 still have visible print lines and was printed before i had the printer dialed in, the Mk2 is a massive improvement on the Mk1.5 is slightly larger and cleaner, then the newest is the Mk3 with pre-modelled parts

    Next i might move ( back ) onto the shin guards, im already on mk8 or so
     
    [ZiiP] NaloaC likes this.
  12. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    Also to add, due to Scaling issues the Lucius pattern warlord project has been shelved, possibly indefinitely,

    but on the other hand, someone posted a high poly model of something else that caught my eye
    [​IMG]

    will post more images as time passes as a sort of project log here
     
  13. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    [​IMG]

    30 hours in and i have... most of a foot
     
    [ZiiP] NaloaC likes this.
  14. 13eightyfour

    13eightyfour Formerly Titanium Angel

    Joined:
    9 Sep 2003
    Posts:
    3,399
    Likes Received:
    108
    Finally managed to get my Ender 3 built up, first prints were a few printer upgrades (filament guides, clips etc). Decided the best way to test out the print quality was an 8mm/Adeptus scale 'warhound'. 12 1/2 hours later!

    [​IMG]
    [​IMG]

    It's not perfect but considering the scale (stands 70mm tall) I'm more than happy with it. A little bit of cleaning/sanding and it'll be fine for games at home.
     
    Almightyrastus and [ZiiP] NaloaC like this.
  15. [ZiiP] NaloaC

    [ZiiP] NaloaC Well-Known Member

    Joined:
    9 May 2008
    Posts:
    4,576
    Likes Received:
    214
    Hell that's epic! :D
     
  16. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    ^^^ You could almost say its Epic 40k ( Puns,,, i have them ) also my Titan(s) are bigger :p

    the Ender 3 is a great printer, likely the best fdm printer for the money right now if it wasnt for FDM slowly getting encroched by DLP / SLA i would consider upgrading my Wanhao to one
     
  17. 13eightyfour

    13eightyfour Formerly Titanium Angel

    Joined:
    9 Sep 2003
    Posts:
    3,399
    Likes Received:
    108
    It would definitely have been quicker/better to print it out on the photon, but I'm waiting on my second replacement LCD for that! :mad: The first one just died, the second decided to only die on half the screen so I can still use it but only for half of the screen. Hopefully, the 3rd one will last longer than a month!
     
  18. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    yeah ive head the photon has issues with the screen, didnt realise they were quite THAT bad though...

    also

    [​IMG]

    HALP

    she is growing !!!
     
  19. fix-the-spade

    fix-the-spade Well-Known Member

    Joined:
    4 Jul 2011
    Posts:
    3,586
    Likes Received:
    314
    Only the Omnissiah can save you now...
     
  20. lilgoth89

    lilgoth89 Captin Calliope

    Joined:
    12 Mar 2011
    Posts:
    2,939
    Likes Received:
    204
    already taller than my warhounds and growing one long print at a time
     

Share This Page