Cooling GETO EXOS - A good external ~$200 setup

Here is what you will need for the GETO EXOS.

I read a lot about watercooling and picked what I tohught were the most reasonably priced components, I will make a list of them, hopefully this can eb helpful to behinners. The said setup is CPU only but can easily be modified to add in a GPU waterblock.

CPU Block - DD RBX $53
http://www.dangerden.com/mall/Blocks/rbx.asp

Radiator - D-Tek Cooler Core $32
http://www.dtekcustoms.com/product.asp?0=205&1=226&3=91

Pump - Danner MagDrive 5 $50
http://www.reefgeek.com/products/categories/pumps/103756.html

Tubing - 1/2" ID Heater Hose ~ 10' (between $10 and $15)
Check your local car store

Clamps - Adjustable steel clamps, quantity 10, around $1 each
Check your local hardware store

Resivior - 16" x 8" x 6" plastic bin, should be around $5
Check your local Walmart-esque store.

120mm fan - $5 or so
Check the modding shop of your choice

What you do is attach the waterblock. Run the tubes out of an extra hole in the back of your case.

On the lid of the bin mount the radiator and pump. Cut 2 holes in the lid and put a bit of hose in them. I reccomend going resivior > pump > waterblock > radiator and then out the radiator into the bin.

Fill the bin up with distilled water and any additives you want.

Whilst it's not as sexy as the EXOS it's got far more performance and flexibility.

 

* +Altron doesnt pay taxes

Now that is geto. Lets see some pictures of it once you build it.

 

Accepting donations for building it

 

build it build it build it <edit> would it work with an old sink some silicone and a 2x4?</edit>

 

Anything that holds water works, although I reccomend you DO NOT use your bathtub for it. We like to promote hygene