Scratch Build – Complete ⭐ Ghost Recon

Long ago I had a project of these in mind, it will be a mixture of a box with a WallPC, will be prepared for both.
As I had a few leftover covers and also some screws and some materials from my old casemod I started making scribbles and went designing it in autocad.
This project unfortunately had no sponsorship from anyone other than me.

This project started on 01/25/2017, almost a year, until finally I managed to finish it and now I will present my project: Ghost Recon


PS: Sorry my bad inglish.

 

Starting the project with a mdf box base I had at home

 

Part of the structure already welded and with some holes already made.

 

PSU Cover already cut and prepared for the placement of screws.

 

Finishing the drilling for 4 fans of 120 mm.


Testing some hardware components.
Took some oxidation because it was a long time stopped

 

Here you can see the lid already with the side cuts made in the sander and hand folds even, with all the screws fixed and such a hole well in the middle of the cover to fix it to the wall.
The cover material is 1.25 mm steel plate.
The handle already has a primer paint, developed in 3/4 "steel tube with a system created to hide the fixing screws so that it is possible to mount and dismount with ease.

 

Starting material painting

 

Looks pretty good.

 

Thanks.

 

Starting the assembly, put the screws in the back cover.

 

Case back cover.

 

structure base.

 

all the hardware already mounted, now only make the installation of the watercooler and the covers.

 

preparing the painting of the glass so that the structure does not appear.

 

name of my page in casemod.

 

putting the cover on fans.

 

After a lot of work, is looked great.

 

And finally I finished my casemod.