Simple and cheap case mod using acrylic paint on Sting Pro Crystal (011D knockoff) Trying to build a low cost mod starting with the case. Thinking about painting some parts of the motherboard and the GPU. Specs Case: Sting Pro Crystal Motherboard: X570 Aorus Xtreme CPU: Ryzen 5 1600 AE (it's a miracle that it worked on an X570 board) RAM: 16gb TForce Delta 2666mhz GPU: Sapphire Vega 56 Pulse PSU: Seasonic M12ii 520w Looking to get more fans, a 360 AIO that is going to be mounted on top and some custom cables. Bare Panel before painting Putting some masking tape, the masking tape is not very good quality so there are a lot of imperfections in the edges After painting with some acrylic paint and a sponge. Lot's of imperfections along the edges but I learned a lot during the process Motherboard painting next week and gpu backplate soon.