News Hands-on with SilverStone's Tundra liquid coolers

SilverStone shows off its own liquid cooler, with an all-metal contact plate and mount and gorgeous radiator housing.
http://www.bit-tech.net/news/hardware/2013/06/08/hands-on-silverstone-tundra-td02-td03/1

 

Really looking forward to these, may swap out my H100 for one of these in the main build.

Got to say the finish does indeed look good on both the smaller and bigger version! Tempted, pricing and warranty will most likely be the decider on what I do.

*Awaits ETA!* Hint: Bit-Tech *Cough*

EDIT: Must say Guys/Girls you've done a great job of covering Computex! Thanks.

 

Thanks! Honestly, you have no idea how much this means. Really appreciate it.

 

Off topic, but just went to check the FT-04 after you mentioned it. Really not a fan of doors on cases and the trend continues. And they're orientated the mobo into a regular position, eurgh!
Still happy with my FT-02.

 

Well not the regular position. They flipped it over 180 degrees.
Better than stock but not as good as the 90 degree orientation of the older Ravens and Fortresses.

 

I should get one of these. TuNdRa with a Tundra. But seriously; I hope these are good. If they prove to be; I'll be recommending these instead of the H80i/100i (Due to the backplate issue.)

Any news on when the new Silverstone Case designs are going to hit the market, anyhow?

 

As I've said, and I'll say it again, thanks!

Hint: I'll take the review samples if you need to clear some space, I'll store them in my rigs.

 

I like those AIOs! They look the part!

 

Oh my. Those are seriously sexy. I hope Silverstone also market the radiator individually, I'd love to have one in my loop.

 

You've got a point there my friend!

 

I saw these mentioned somewhere else recently, possibly on Toms, and instantly they got my attention looks wise. I was already considering an AIO cooler for my future build and these look amazing, as does almost everything Silverstone makes. The thing I wish to bring up though is that on the other article, a few people mentioned that the type of tubing used is that of much older models from other manufacturers and isn't anywhere near as good as the tubing now used on almost all models. I'll look forward to a future review to see what you guys actually think of it when you get your hands on them.

Any idea of when we might possibly get a review?

 

About time someone started doing some AIO coolers with a decent sized radiator, but it looks like Nanoxia are really going to turn the screw on Corsair etc.

Saw a video for a new case I think it was, and in it they had a 360mm AIO cooler which looks quite decent but they didn't comment on it and moved along very quickly.