Hey ppl im new to the forums so go easy, tryin to make up summit for a flight case! (probably wont work but anyways) I got an old power supply and put persbex window in the top ect used the iec plug and connected to an extension lead all seems to work but i ave the switch a l.e.d fan and cathode i want to link up so switch can run cathode and fan and also turn on lead, but i also want to include a power light using a 5mm Bright L.E.D I am stuck so help help help when i bought my cathode i got small blue inverter????????!!!!!! ANY SUGGESTIONS MEAN ALOT Regards tommy
Hm.well..welcome to the forums Tom....as of what your needing help on..I'm not sure...I suggest you rewrite the "Help" topic in the "Modding" section...and slow down and explain carefully what your wanting and not understanding....right now all i could get from that post was Hey, help...I need....akhdgahgjafjadkjfajdfjafajfajdfjadffjdfjajdfkajdfjadfjdkfjfdjfajdfdjfkajfkjadfj please...... Think out what the problem is and write down.. Other than that...good luck and welcome again
Plug the cathode into it. One problem solved It kind of sounds like you either want to switch on the LED fan and cathode at the same time as the pc or you want to be able to switch the lighting on independently. You'll need to do a little soldering to do it independently and using a normal switch (not momentary) on the ground should do that for you. The bright power led can just be connected to a molex as it's likely to need more voltage than the motherboard and supply and is basically a safer way of doing it. It'll just function like a normal power led as the molexes will get power when the pc is switched on anyway. Show pics when you're done
