1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cases Hi everyone - help on build up of paint

Discussion in 'Hardware' started by lynx96, 2 Jan 2012.

  1. lynx96

    lynx96 New Member

    Joined:
    27 Sep 2011
    Posts:
    72
    Likes Received:
    1
    hi everyone i am painting this case and when i was doing the front part because it has already been painted i was just touching up the scratches from moving it about so i sprayed over the scatches and i stoped spraying it now it has bulid up of paint heres the picture what do you think i should do heres image
    [​IMG]
     
    Last edited by a moderator: 3 Jan 2012
  2. Tangster

    Tangster Butt-kicking for goodness!

    Joined:
    23 May 2009
    Posts:
    3,085
    Likes Received:
    151
    If you want a good finish then sand it down flat and start again.
     
  3. lynx96

    lynx96 New Member

    Joined:
    27 Sep 2011
    Posts:
    72
    Likes Received:
    1
    tangster what do you mean by down flat
     
  4. getDownShep

    getDownShep New Member

    Joined:
    14 Aug 2011
    Posts:
    180
    Likes Received:
    10
    You could use some very fine wet and dry sandpaper to polish it up
     
  5. Krikkit

    Krikkit All glory to the hypnotoad! Super Moderator

    Joined:
    21 Jan 2003
    Posts:
    23,453
    Likes Received:
    368
    You'll have to take that layer of paint right back to plastic and start again to get a decent finish - once it starts to run you've got far, far too much on which is very tricky to correct.
     

Share This Page