1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cooling high water cooled temps

Discussion in 'Hardware' started by fei, 8 Mar 2005.

  1. fei

    fei New Member

    Joined:
    20 Dec 2003
    Posts:
    38
    Likes Received:
    0
    ok i got it all plumb up and running.

    [​IMG]

    used the wierd findings of backing the screws of water block abit and temps are better at least!
    30mins of priming and temps are 48c flicking to odd 50 at load

    now i'm waiting for the silverprop fusion HL to come in stock for my x850XT PE
    and will research abit more and which pump to upgrade to.

    the DDC i had for testing was modded already, but that stopped pumping water for no reason! and had to nudge it about abit to get it started again so that's kinda put me off that pump abit
     
  2. Wang

    Wang New Member

    Joined:
    9 Mar 2005
    Posts:
    32
    Likes Received:
    0
    Nice rig!
    Is the hose going into the G4 kinked?
    DDC problem could be the molex connector, I hate the loosness of the 2 pin adapters.
     
  3. fei

    fei New Member

    Joined:
    20 Dec 2003
    Posts:
    38
    Likes Received:
    0
    none of the hose's are kinked, its just the angle i took the pic at.
     
Tags:

Share This Page