Welcome to my buildlog of the Bitfenix Prodigy called: IMP What is an Imp? An imp is a mythical creature, similar to a fairy or demon. They are common in folklore and superstition. The word Imp is probably derived from the term Ympe. Imps in most stories are more naughty than truly a threat to humans. Imps are originally found in Germanic mythology, in which they are described as small, relatively weak demons. They are often depicted as small, unattractive creatures. They were not necessarily malicious. Their behavior is usually wild and uncontrollable. They love to deceive people, but usually do so purely to get attention. And this is what the build is about. Small, wild and uncontrollable. Enjoy! More to come! Parts of the IMP Case: BitFenix Prodigy Mini-ITX - Black BitFenix Recon Fan Controller BitFenix Prodigy Window Side Panel - Black BitFenix Prodigy Soft Touch Black, Red Frame Corsair Air Series AF120 Performance Edition 1650RPM (optional) Hardware: Intel Core i5 4670K Corsair H60 (2013) ASUS Maximus VI Impact MITX Corsair Vengeance Red Pro 16GB DDR3-1600 CL9 kit ASUS GTX770 OC DCII Corsair AX850 Corsair FORCE GT 120GB SSD Let's begin with the best part. Unboxing the packages en shooting some pictures! Freddy from Highflow.nl, Thanks for the HF casebadge and lollipop! There was a nice package waiting for me.. my precious Intel Core i5 4670K and the Corsair Vengeance Pro. Today after work there was another package waiting for me! Oh happy joy! This time there were 3 pieces of plexiglass with the colors: Black, Clear Red en Clear. The motherboard is nowhere to be found. But I can not say that I can't do no work on the IMP. Went shopping today for some Dremelparts. And a saw for plexiglas. This beautifull Corsair H60 is my new cooler. I wanted a Cooler Master, but then again. The Haswell would be very hot. So that's why I bought this nice piece of watercooling. And also the Bitfenix Window Side Panel was deliverd with the Bitfenix Spectre 200mm black. So and now some modwork! A piece of plexiglas (5mm) with a vile... that won't work! I had forgotten that I had a Dremel Mulititool, whoops! Fitting, sanding, fitting, sanding, fitting, sanding.... etc etc. Here the result (Don't mind the fan. I can't life without a PC so build my old mITX motherboard in.) Nice! It's very clean and neat! Now I can watch the internals from above! The modding from today. It's raining here in the Netherlands so I decided to work on the case. And here is my little precious. The unboxing ASUS Maximus VI Impact Mini-ITX! Enclosed in package: 4x SATA600 cables 1x MPCIE Combo II (excl. M.2 SSD) 1x SupremeFX 1x WiFi Antenna (AC) 1x ROG Casebadge 1x Direct Panel kabel 1x I/O schield 4x Washers for Mount 1x Installation CD-Rom 1x Stickers for cables 1x DIY manual I have specially waited for the frontpanel with the design. This afternoon the frontpanel was deliverd! So, it's picture time! Here the results! Collage: *Oeeeh Aaah* Till the next update! This build is sponsored by: ModWithMe
It's an Asus VI Nexxo ... you drolled too much on your KB and your fingers slipped between keys Edit : BTW, I'm still waiting for some more Metaversa 2.0 porn, Nexxo matey
