Discussion in 'Project Logs' started by ciobanulx, 12 Oct 2015.
Finally the GPUs...
Will the be parallel?
I think pretty much all are Parallel now, I think its slightly better cooling than series
Cheers! I use seamless background paper, it's really good and easy to set up
Yea they will be in parallel and using tubes in between them
Well, makes sense...
But must say i'm looking forward to seeing the finished loop / a.k.a.: V2
Parallel is an interesting choice for the tube-runs, might have missed something though
Merry Christmas, y'all
Cheers man! I always go for parallel between graphics cards however I've always used a bridge, this will be the first time doing it with just tubes and slightly different with the inlet and outlet
New tubing is done and the build is once again in one piece ready for filling!
Using EK Pastel White this time and going to be stick with that for the long term
Have a look at the new tubing, I'm loving the look of this
Thanks for checking it out guys
Here are the final pictures for V2 of this build! Sorry, they're a bit later than promised but I've been very busy lately, moving house as well as dealing with some personal issues.
Things are starting to pick up now so hopefully more exciting things coming!
Speaking of exciting things, I can confirm that this build will be on display at Computex 2016 all thank to Avexir! This is a huge honour for me! If anyone ends up there, keep an eye out!
Let have a look at the build guys!
Hope you guys like it!
Again I want to say a huge thanks to all the sponsors on this project, it's definitely been one of the more exciting projects I've worked on in 2015!
Thanks Gigabyte, In Win, Avexir, EK Water Blocks, Primochill, Ram City and Icemodz!
For over 60 final pics of this build you can check out the album on my page here - https://www.facebook.com/media/set/?set=a.938369092918018.1073741853.772776719477257&type=3
Stay tuned for more exciting projects to come in 2016!
It came out Awesome man. and Congratz with Computex
Thanks a lot mate! Much appreciated
I have some new updates on this build
After two versions it's now going into V3
AVEXIR have asked me to display the build at their Computex booth coming up and it's going through some changes for this. Changing some of the hardware and the loop a little bit.
Due to the changes new build name is IN WIN PREMIUM
Hope you guys enjoy these quick updates on this build yet again.
First up, new motherboard and graphics cards!
Thanks for checking it out and stay tuned for more.
I've added some vinyl to the motherboard to bring it in line with the theme of the build!
Most of the other things will be a straight swap
Also a look at the EK Supremacy EVO CPU block and Avexir Blitz Memory.
Thanks for checking it out!
Have to say this is one of the major inspirations for my 909 build Was the inner frame powdercoated as one piece? Did you have any issues with the powdercoat 'bridging' small gaps where the pressed steel overlaps? All looks very clean to me in the worrying areas but I'm not sure if you've cleaned it up after the coating maybe.
Thanks a lot, glad you like it!
The inner frame was powder coated in one go over the original finish and came out great, nothing was done to it afterwards
I'm no expert in powder coating however the place I used to use seemed to do a pretty good job, I've since moved from the area though and haven't found any better options yet where I am now.
Changed some of the vinyl logos in the build from Gigabyte G1 to a more ASUS Signature look as well as showing some EK love. Also a special shout-out to AVEXIR on the side panel
And check out the sweet looking ASUS STRIX GTX 980TI!
Thanks for checking it out and stay tuned for more!
I made a quick video of installing an EK Waterblock to the ASUS STRIX GTX 980TI graphics cards. It's my very first video so let me know what you think. I know the lighting isn't too good in this one but I'm learning. Hopefully the content is good
Subscribe to the Simple Modz channel for more watercooling and modding related videos.
Check out the video here:
Also some shots of the cards with sexy waterblocks installed
Thanks for checking it out!
I think it's pretty obvious that the build is already at Computex by now. Just been busy as always and haven't managed to post all the updates yet.
Here are shots of the new tubing layout before filling up, just slightly different.
Notice the vinyl work on the small SLI bridge, it was the only one I had available at the time however it turned out great.
Thanks for checking it out, I'll have the final pics in the next update!
Here's the finished build!
Thanks for checking it out guys and hope you have enjoyed these last updated!
Separate names with a comma.