1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – In Progress inFusion by Smasher [Scratch Build] [Finished]

Discussion in 'Project Logs' started by Smasher, 3 Jul 2012.

  1. Smasher

    Smasher What's a Dremel?

    Joined:
    4 Jun 2011
    Posts:
    37
    Likes Received:
    1
    inFusion


    The project infusion is a Scratch Build case that will be builded from the beginning with different types of materials: Acrylic, Metal and Wood.
    Have a unique shape and design, containing in it a powerful hardware.
    Have a watercooling (Corsair H50) modified for this project.
    The aesthetic is warm hug, with around 183 hours dedicated solely and exclusively to this design.
    These will be the base material will be used:
    Samples of acrylic, acrylic tubes, and sheets of old cases.

    [​IMG]

    With this cover of old cabinet, the main structure will be built.

    [​IMG]

    Based on a test piece made of cardboard, the cuts are marked.

    [​IMG]

    [​IMG]

    Starting!

    [​IMG]

    [​IMG]

    [​IMG]

    Filing the edges and sand the paint to make the raw metal.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    With this piece semi finished, we will build the front, which will house the hard disk and DVD lectograbadora.

    [​IMG]

    [​IMG]

    [​IMG]

    While I Twitcam

    [​IMG]

    With the heat gun to bend the acrylic we have left to 90 °.

    [​IMG]

    [​IMG]

    [​IMG]

    Now the sides of this piece, also bent with the heat gun.

    [​IMG]

    [​IMG]

    Las piezas se pegan con cloroformo industrial, diluido con acrilico para darle una consistencia espesa y que no se evapore tan rapido.

    [​IMG]

    The rough edges that will be sanded.

    [​IMG]

    [​IMG]

    [​IMG]

    The rough edges that will be sanded.

    [​IMG]

    [​IMG]

    [​IMG]

    Más de la estructura principal.

    [​IMG]

    [​IMG]

    [​IMG]

    I had the problem that the acrylic is encompassed by a lot of heat, so should replace this piece.

    [​IMG]

    Now yes!

    [​IMG]

    The "cap" where under DVD.

    [​IMG]

    [​IMG]

    [​IMG]

    Adding an acrylic to add rigidity.

    [​IMG]

    [​IMG]

    Through which pass the wires from the HDD and DVD.

    [​IMG]

    Submission:

    [​IMG]

    From one side of cabinet manufacture it a holder for the source:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Screws and mother presented.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    VGA:

    [​IMG]
     
    Last edited: 26 Aug 2012
  2. Smasher

    Smasher What's a Dremel?

    Joined:
    4 Jun 2011
    Posts:
    37
    Likes Received:
    1
    Well after a while I return with much progress.
    I was at an event, in Loki Custom Tech stand, exposing White Timantti, photos of the event here:

    Web

    In this joined Kingston as Sponsor, providing a HyperX 2x4GB DDR3

    and 110gb.

    [​IMG]

    [​IMG]

    We continue to progress, stand to tighten and not have to go with glue:

    [​IMG]
    [​IMG]

    And set the psu support:

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Support for the base:

    [​IMG]

    Cut cut cut

    [​IMG]

    PSU

    [​IMG]

    "Knockouts" where they will spend the sata and power

    [​IMG]
    [​IMG]

    Ventilation to go with metal mesh

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Now we start with the "box" of the motherboard

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    This is a side project, will modding on these pc's, can follow the project on

    www.facebook.com/SmashModding

    [​IMG]

    Sides

    [​IMG]
    [​IMG]
    [​IMG]

    Small window on a single pass of the power cables

    [​IMG]
    [​IMG]

    Old cabinet veneer, thick as a good basis for

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Presenting

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Support for HDD's

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Re-do media

    [​IMG]
    [​IMG]
    [​IMG]

    i/o Panel

    [​IMG]

    Window-mesh

    [​IMG]

    Support structure

    [​IMG]
    [​IMG]
    [​IMG]

    Good and so is at the moment, I hope your opinions!
     
  3. mybadomen

    mybadomen What's a Dremel?

    Joined:
    19 Jan 2012
    Posts:
    163
    Likes Received:
    5
    Looking good. I always love the Raw Modding. Thats all i did for years as i had old machines and no money. So i love seeing this stuff! Shows major talent. Look forward to seeing what comes from you in the future.

    MybadOmen
     
  4. Marcos_Viegas

    Marcos_Viegas Minimodder

    Joined:
    6 May 2010
    Posts:
    401
    Likes Received:
    3
    Really is a very good idea, I'm enjoying the project, congratulations!
     
  5. Enigma8750

    Enigma8750 What's a Dremel?

    Joined:
    13 Jul 2011
    Posts:
    11
    Likes Received:
    0
    Beautiful Artwork Smash....
     
  6. KryptiK

    KryptiK What's a Dremel?

    Joined:
    12 Jan 2012
    Posts:
    43
    Likes Received:
    3
    That's one bad ass looking design you got there! :rock:

    Wondering what colours your going to spray it with? (if you are going in that direction)
     
  7. Smasher

    Smasher What's a Dremel?

    Joined:
    4 Jun 2011
    Posts:
    37
    Likes Received:
    1
    Thanks!

    Thank you dude!

    :3

    Well, still do not know what colors... Im thinking about violet, black or blue... What do you say?

    Here more:

    Well I have a few developments
    I worked all part of the radiator

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]

    And went back to do the HDD bracket because on the other, the bottom had no room for the cables:

    [​IMG]

    [​IMG]

    And I started a small reservoir for H50, lack seal:

    [​IMG]

    [​IMG]

    [​IMG]

    regards!
     
  8. dbradford32

    dbradford32 What's a Dremel?

    Joined:
    22 Aug 2010
    Posts:
    120
    Likes Received:
    0
    OMG! THIS IS AWESOME! Seriously, this is genius! Keep it up!
     
  9. Ace_finland

    Ace_finland Minimodder

    Joined:
    11 Aug 2012
    Posts:
    228
    Likes Received:
    7
    this is just great! i love acrylic builds!
     
  10. bluc

    bluc What's a Dremel?

    Joined:
    4 Apr 2012
    Posts:
    284
    Likes Received:
    3
    Great work :thumb: Subscribed
     
  11. Smasher

    Smasher What's a Dremel?

    Joined:
    4 Jun 2011
    Posts:
    37
    Likes Received:
    1
    After a while of modding, progress:

    Modification "box" of the PSU:

    [​IMG]

    [​IMG]

    And finally paint!

    [​IMG]

    [​IMG]

    [​IMG]

    Ready to paint

    [​IMG]

    [​IMG]

    [​IMG]

    Was something like:

    [​IMG]

    [​IMG]

    VGA Cover

    [​IMG]

    [​IMG]

    Fans:

    [​IMG]

    [​IMG]

    Painting on the VGA:

    [​IMG]

    [​IMG]

    [​IMG]

    PSU Sleeving:

    [​IMG]

    [​IMG]

    [​IMG]

    This source is unique in this topic:

    [​IMG]

    Which would not let me do sleeving 1x1, cut extensions.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Santi approves the project!

    [​IMG]

    Scratch Build finished paint job

    [​IMG]

    [​IMG]

    [​IMG]

    As we continue with the cables:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Starts assembly!

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    And the mini reservoir of H50:

    [​IMG]

    In a little while final photos!
     
    Last edited: 26 Aug 2012
  12. Smasher

    Smasher What's a Dremel?

    Joined:
    4 Jun 2011
    Posts:
    37
    Likes Received:
    1
    Finished Project.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Hardware:

    Intel(R) Celeron(R) CPU G530 @ 2.40GHz, 2394 MHz
    ATI Radeon HD 4870 1024MB GDDR5
    Kingston 2x4GB DDR3 1600
    PowerCooler 850w 24+4 Pins Home Made Sleeving
    GA-H67N-USB3-B3 - GIGABYTE
    SSD Kinston Hyper 110gb Sata3
    WD Caviar Blue 320gb
    WD Scorpion 320gb

    Facebook: http://www.facebook.com/SmashModding
    Web: http://www.smasher.com.ar
     
    YEHBABY likes this.
  13. Pranja

    Pranja Blackwolf

    Joined:
    18 Dec 2011
    Posts:
    1,171
    Likes Received:
    24
    Fantastic job. Well done! :)

    Can you post more pics so we can see how you modded H50?
     
  14. Smasher

    Smasher What's a Dremel?

    Joined:
    4 Jun 2011
    Posts:
    37
    Likes Received:
    1
    Thanks!

    Those are all the photos: (
    Only cut original hoses and build a reservoir! :)
     

Share This Page