Discussion in 'Project Logs' started by MathModding, 28 Apr 2015.
-And a ton of other stuff, because it's the only Tou I've ever seen modded.
This is the door of coarsely cut! Carbon 2mm thick.
Still many cuts above work, let fastening lugs has to make on the top
Soon the end for my mod
That is what patience and rigor allows for
Alu 1.5mm, drill, jigsaw, milling, precision files.
my carbon door for my mod "Carbon Luxury" on INWin Toù carbonized frame.
Awesome work gone into this
^Should be lighter by about 20 pounds too.
Block homemade ;-) for my tubing.
Well here we go
Start the mold for the cache alim 100% carbon.
I have to give him the most nikel can look to reduce finishing steps in once the mold made.
Initially, the power supply cache is gross, I will have to cut carbon to give it the desired shape. But that was after ^^
I admit from the unknown and have a little apprehension for the price that it costs me ^^
My final loop finish. With pass through the back MB.
Beginning carbon molding. Preparation of the mold.
1st step: Sanding to 600 and then scrub BELGOM ALU by hand.
2nd stages: the first layer of "release wax" and allowed to dry before wiping.
The initial investment is brutal, but now you can make an entire case from CF.
loop looks great.
Separate names with a comma.