I have just "skip-surfed" 3 Compaq TFT450's lcd panels and a sharp LM10V33 640*480 tft from an ncr till. I want to build one into the side of my Lan server so I have an all-in-one box. The Compaq's all seem to have different faults so I think I should be able to get at least 1 working. But I have no power supplies for them - it uses a ps/2 power connector and needs 12V @ 2.5A and 5V @ 2.5A so I will use an old AT psu to drive it but I havent found the pinouts yet. The Sharp is my preffered option as it will fit into the case better but the inverter on the interface board is blown and again I have no documentation available for pinouts for the power supply or the 25 pin connector for the interface board. Part Nos : Till : NCR 5952-2000-M098 - Panel LM10V33 (have datasheet). Monitors : Compaq TST450, PSU 643P 01-04, lcd panel is a philips HLD1405-010550 driven by a CTX CX70915