Hello I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself The design is mine, all the pieces are done alone and are still under construction. The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one. Little data. dimensions: Frame + covers 535x460x226 + glass 547x472x250 Fans: Front x3 120 Top x3 140 Back x1 120 The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter. Below I upload some photos from the prototype of the rack. Stage 2 All elements already cut from the target material (at all still protective film) Left to make the nuts to screw "glass" and put the residue. Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.