Modding My second mod

Discussion in 'Modding' started by Sputnik, 19 Sep 2005.

  1. Sputnik

    Sputnik What's a Dremel?

    Joined:
    1 Sep 2005
    Posts:
    236
    Likes Received:
    0
    These are ideas for my second mod, which colour would you put where? The top LED is for the power and the bottom LED is for the HDD.

    [​IMG]

    or

    [​IMG]

    Sputnik :hehe:
     
    Last edited: 23 Sep 2005
    Sputnik, 19 Sep 2005
    #1
  2. c0d3_z3r0

    c0d3_z3r0 What's a Dremel?

    Joined:
    11 Sep 2005
    Posts:
    68
    Likes Received:
    0
    What about both blue?
     
    c0d3_z3r0, 19 Sep 2005
    #2
  3. blaffer4x4

    blaffer4x4 What's a Dremel?

    Joined:
    13 Oct 2004
    Posts:
    50
    Likes Received:
    0
    I'd go for power blue and HDD white (sound like new colors, power-blue)
     
    blaffer4x4, 19 Sep 2005
    #3
  4. BobbyMParr

    BobbyMParr GameDemon

    Joined:
    18 Jun 2004
    Posts:
    858
    Likes Received:
    0
    blue and red
     
    BobbyMParr, 20 Sep 2005
    #4
  5. mattthegamer463

    mattthegamer463 What's a Dremel?

    Joined:
    26 Nov 2004
    Posts:
    2,804
    Likes Received:
    1
    blue and red contrast too much. blue power and white hdd (the second pic) work best, in my oppinion
     
    mattthegamer463, 20 Sep 2005
    #5
  6. Sputnik

    Sputnik What's a Dremel?

    Joined:
    1 Sep 2005
    Posts:
    236
    Likes Received:
    0
    Okay, here is what I have done. I couldn't find a blue LED...so I used red!

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Sputnik :hehe:
     
    Sputnik, 20 Sep 2005
    #6
  7. doryakov

    doryakov What's a Dremel?

    Joined:
    8 Aug 2005
    Posts:
    254
    Likes Received:
    0
    how many voltage the leds?
    is the leds 3mm or 5mm ?
     
    doryakov, 25 Sep 2005
    #7
  8. Sputnik

    Sputnik What's a Dremel?

    Joined:
    1 Sep 2005
    Posts:
    236
    Likes Received:
    0
    The LEDs are 5mm.

    I suspect that the LEDs are running at 5V (I never checked) and I don't know what the current being put through them is (I never checked this either). The motherboard has resistors that is limiting the current, I just soldered on new LEDs to the wires.

    Sputnik :hehe:
     
    Sputnik, 25 Sep 2005
    #8

Share This Page